裁線條碼亮燈
20190104-2
<c> //20190104增加LCE顯示
- include <Wire.h>
- include <LiquidCrystal_I2C.h>
- include <usbhid.h>
- include <usbhub.h>
- include <hiduniversal.h>
- include <hidboot.h>
- include <SPI.h>
- include <FastLED.h>
- define NUM_LEDS 60 // led灯数量
- define DATA_PIN 6 // 数据传输引脚(Digital 6)
- define BRIGHTNESS 25 //設定led亮度
int LIGHTDELAY= 60/NUM_LEDS/60; String s; CRGB leds[NUM_LEDS]; LiquidCrystal_I2C lcd(0x27,20,4); // set the LCD address to 0x27 for a 16 chars and 2 line display
class MyParser : public HIDReportParser {
public: MyParser(); void Parse(USBHID *hid, bool is_rpt_id, uint8_t len, uint8_t *buf); protected: uint8_t KeyToAscii(bool upper, uint8_t mod, uint8_t key); virtual void OnKeyScanned(bool upper, uint8_t mod, uint8_t key); virtual void OnScanFinished();
};
MyParser::MyParser() {}
void MyParser::Parse(USBHID *hid, bool is_rpt_id, uint8_t len, uint8_t *buf) {
// If error or empty, return
if (buf[2] == 1 || buf[2] == 0) return;
for (uint8_t i = 7; i >= 2; i--) {
// If empty, skip
if (buf[i] == 0) continue;
// If enter signal emitted, scan finished
if (buf[i] == UHS_HID_BOOT_KEY_ENTER) {
OnScanFinished();
}
// If not, continue normally
else {
// If bit position not in 2, it's uppercase words
OnKeyScanned(i > 2, buf, buf[i]);
}
return;
}
}
uint8_t MyParser::KeyToAscii(bool upper, uint8_t mod, uint8_t key) {
// Letters
if (VALUE_WITHIN(key, 0x04, 0x1d)) {
if (upper) return (key - 4 + 'A');
else return (key - 4 + 'a');
}
// Numbers
else if (VALUE_WITHIN(key, 0x1e, 0x27)) {
return ((key == UHS_HID_BOOT_KEY_ZERO) ? '0' : key - 0x1e + '1');
}
if(key== 55 ) {
return 46;
}else return 0;
}
void MyParser::OnKeyScanned(bool upper, uint8_t mod, uint8_t key) {
uint8_t ascii = KeyToAscii(upper, mod, key); // Serial.print((char)ascii); delay(100); s= s + ((char)ascii) + "";
}
void MyParser::OnScanFinished() {
int i,k,j=2;
float a=s.toFloat();
String lcdtext2=s +" m";
lcd.clear();
lcd.setCursor(1,0);
lcd.print("Cable Length:");
lcd.setCursor(6,1);
lcd.print(lcdtext2);
a=a*60;
int uplimit=ceil(a)-1;
int downlimit=floor(a)-1;
FastLED.clear();
for(i=1;i< downlimit;i++){
leds[i] = CRGB::Yellow;
FastLED.show();
delay(LIGHTDELAY);
FastLED.clear();
}
if(uplimit==downlimit){
leds[uplimit] = CRGB::White;
}else{
leds[uplimit] = CRGB::Red; // 设置第1个led灯的颜色Red
leds[downlimit] = CRGB::Green; // 设置第2个led灯的颜色Red
}
FastLED.show();
s="";
}
USB Usb; USBHub Hub(&Usb); HIDUniversal Hid(&Usb); MyParser Parser;
void setup() {
FastLED.addLeds<NEOPIXEL, DATA_PIN>(leds, NUM_LEDS); // 初始化所有LED灯
FastLED.setBrightness( BRIGHTNESS );
Serial.begin( 115200 );
lcd.init();
lcd.backlight();
lcd.setCursor(1,0);
lcd.print("Cable Length:");
if (Usb.Init() == -1) {
Serial.println("OSC did not start.");
}
delay( 200 );
Hid.SetReportParser(0, &Parser);
}
void loop() {
Usb.Task();
}
</c>
20190104-1
<c> //20190104增加流水燈
- include <usbhid.h>
- include <usbhub.h>
- include <hiduniversal.h>
- include <hidboot.h>
- include <SPI.h>
- include <FastLED.h>
- define NUM_LEDS 60 // led灯数量
- define DATA_PIN 6 // 数据传输引脚(Digital 6)
- define BRIGHTNESS 25 //設定led亮度
int LIGHTDELAY= 60/NUM_LEDS/60; String s; CRGB leds[NUM_LEDS];
class MyParser : public HIDReportParser {
public: MyParser(); void Parse(USBHID *hid, bool is_rpt_id, uint8_t len, uint8_t *buf); protected: uint8_t KeyToAscii(bool upper, uint8_t mod, uint8_t key); virtual void OnKeyScanned(bool upper, uint8_t mod, uint8_t key); virtual void OnScanFinished();
};
MyParser::MyParser() {}
void MyParser::Parse(USBHID *hid, bool is_rpt_id, uint8_t len, uint8_t *buf) {
// If error or empty, return
if (buf[2] == 1 || buf[2] == 0) return;
for (uint8_t i = 7; i >= 2; i--) {
// If empty, skip
if (buf[i] == 0) continue;
// If enter signal emitted, scan finished
if (buf[i] == UHS_HID_BOOT_KEY_ENTER) {
OnScanFinished();
}
// If not, continue normally
else {
// If bit position not in 2, it's uppercase words
OnKeyScanned(i > 2, buf, buf[i]);
}
return;
}
}
uint8_t MyParser::KeyToAscii(bool upper, uint8_t mod, uint8_t key) {
// Letters
if (VALUE_WITHIN(key, 0x04, 0x1d)) {
if (upper) return (key - 4 + 'A');
else return (key - 4 + 'a');
}
// Numbers
else if (VALUE_WITHIN(key, 0x1e, 0x27)) {
return ((key == UHS_HID_BOOT_KEY_ZERO) ? '0' : key - 0x1e + '1');
}
if(key== 55 ) {
return 46;
}else return 0;
}
void MyParser::OnKeyScanned(bool upper, uint8_t mod, uint8_t key) {
uint8_t ascii = KeyToAscii(upper, mod, key); // Serial.print((char)ascii); delay(100); s= s + ((char)ascii) + "";
}
void MyParser::OnScanFinished() {
int i,k,j=2;
float a=s.toFloat();
a=a*60;
int uplimit=ceil(a)-1;
int downlimit=floor(a)-1;
//Serial.println(uplimit);
FastLED.clear();
for(i=1;i< downlimit;i++){
leds[i] = CRGB::Yellow;
FastLED.show();
delay(LIGHTDELAY);
FastLED.clear();
}
if(uplimit==downlimit){
leds[uplimit] = CRGB::White;
}else{
leds[uplimit] = CRGB::Red; // 设置第1个led灯的颜色Red
leds[downlimit] = CRGB::Green; // 设置第2个led灯的颜色Red
}
FastLED.show();
s="";
}
USB Usb; USBHub Hub(&Usb); HIDUniversal Hid(&Usb); MyParser Parser;
void setup() {
FastLED.addLeds<NEOPIXEL, DATA_PIN>(leds, NUM_LEDS); // 初始化所有LED灯
FastLED.setBrightness( BRIGHTNESS );
Serial.begin( 115200 );
Serial.println("Start");
if (Usb.Init() == -1) {
Serial.println("OSC did not start.");
}
delay( 200 );
Hid.SetReportParser(0, &Parser);
}
void loop() {
Usb.Task();
}
</c>
20190103
<c>
- include <usbhid.h>
- include <usbhub.h>
- include <hiduniversal.h>
- include <hidboot.h>
- include <SPI.h>
- include <FastLED.h>
- define NUM_LEDS 60 // led灯数量
- define DATA_PIN 6 // 数据传输引脚(Digital 6)
- define BRIGHTNESS 25 ////設定led亮度
String s; CRGB leds[NUM_LEDS];
class MyParser : public HIDReportParser {
public: MyParser(); void Parse(USBHID *hid, bool is_rpt_id, uint8_t len, uint8_t *buf); protected: uint8_t KeyToAscii(bool upper, uint8_t mod, uint8_t key); virtual void OnKeyScanned(bool upper, uint8_t mod, uint8_t key); virtual void OnScanFinished();
};
MyParser::MyParser() {}
void MyParser::Parse(USBHID *hid, bool is_rpt_id, uint8_t len, uint8_t *buf) {
// If error or empty, return if (buf[2] == 1 || buf[2] == 0) return;
for (uint8_t i = 7; i >= 2; i--) {
// If empty, skip
if (buf[i] == 0) continue;
// If enter signal emitted, scan finished
if (buf[i] == UHS_HID_BOOT_KEY_ENTER) {
OnScanFinished();
}
// If not, continue normally
else {
// If bit position not in 2, it's uppercase words
OnKeyScanned(i > 2, buf, buf[i]);
}
return; }
}
uint8_t MyParser::KeyToAscii(bool upper, uint8_t mod, uint8_t key) {
// Letters
if (VALUE_WITHIN(key, 0x04, 0x1d)) {
if (upper) return (key - 4 + 'A');
else return (key - 4 + 'a');
}
// Numbers
else if (VALUE_WITHIN(key, 0x1e, 0x27)) {
return ((key == UHS_HID_BOOT_KEY_ZERO) ? '0' : key - 0x1e + '1');
}
if(key== 55 ) {
return 46;
}else return 0;
}
void MyParser::OnKeyScanned(bool upper, uint8_t mod, uint8_t key) {
uint8_t ascii = KeyToAscii(upper, mod, key); // Serial.print((char)ascii); delay(100); s= s + ((char)ascii) + "";
//s=s + ascii; }
void MyParser::OnScanFinished() {
float a=s.toFloat();
a=a*60;
int uplimit=ceil(a)-1;
int downlimit=floor(a)-1;
Serial.println(uplimit);
FastLED.clear();
if(uplimit==downlimit){
leds[uplimit] = CRGB::White;
}else{
leds[uplimit] = CRGB::Red; // 设置第1个led灯的颜色Red
leds[downlimit] = CRGB::Green; // 设置第2个led灯的颜色Red
}
FastLED.show();
s="";
}
USB Usb; USBHub Hub(&Usb); HIDUniversal Hid(&Usb); MyParser Parser;
void setup() {
FastLED.addLeds<NEOPIXEL, DATA_PIN>(leds, NUM_LEDS); // 初始化所有LED灯
FastLED.setBrightness( BRIGHTNESS );
Serial.begin( 115200 );
Serial.println("Start");
if (Usb.Init() == -1) {
Serial.println("OSC did not start.");
}
delay( 200 );
Hid.SetReportParser(0, &Parser);
}
void loop() {
Usb.Task();
} </c>