Minimum Bending Radius

出自TSK WIKI
於 2016年8月26日 (五) 12:04 由 Root​(留言 | 貢獻) 所做的修訂 (新頁面: *300.34 Conductor Bending Radius. **The conductor shall not be bent to a radius less than 8 times the overall diameter for nonshielded conductors or 12 times the overall diameter for...)
(差異) ←上個修訂 | 最新修訂 (差異) | 下個修訂→ (差異)
跳至導覽 跳至搜尋
  • 300.34 Conductor Bending Radius.
    • The conductor shall not be bent to a radius less than 8 times the overall diameter for nonshielded conductors or 12 times the overall diameter for shielded or lead-covered conductors during or after installation. For multiconductor or multiplexed singleconductor cables having individually shielded conductors, the minimum bending radius is 12 times the diameter of the individually shielded conductors or 7 times the overall diameter, whichever is greater.