ISO 9001:2015條文

出自TSK WIKI
於 2016年5月24日 (二) 11:22 由 Root​(留言 | 貢獻) 所做的修訂 (→5 領導 Leadership)
跳至導覽 跳至搜尋

範圍

  1. 範圍
  2. 規範性引用文件
  3. 術語和定義
  4. 組織的背景
    1. 理解組織及其背景Context of the organization
    2. 理解相關方的需求和期望Understanding the needs and expectations of interested parties
    3. 品質管制系統範圍的確定Determining the scope of the quality management system
    4. 品質管制系統與過程Quality management system and its processes
  5. 領導作用Leadership
    1. 領導作用和承諾Leadership and commitment
    2. 品質政策Quality policy
    3. 組織的作用、職責和許可權Organizational roles, responsibilities and authorities
  6. 策劃Planning for the quality management system
    1. 風險和機遇的應對措施Actions to address risks and opportunities
    2. 品質目標及其實施的策劃Quality objectives and planning to achieve them
    3. 變更的策劃Planning of changes
  7. 支持Support
    1. 資源 Resources
    2. 能力 Competence
    3. 意識 Awareness
    4. 溝通 Communication
    5. 形成文件的資訊 Documented information
  8. 運行Operation
    1. 運行的策劃和控制Operational planning and control
    2. 確定產品服務的要求Determination of requirements for products and services
    3. 產品和服務開發 Design and development of products and services
    4. 外部提供的產品和服務的控制Control of externally provided products and services
    5. 產品和服務提供 Production and service provision
    6. 產品和服務放行 Release of products and services
    7. 不符合的過程輸出產品和服務控制 Control of nonconforming process outputs, products and services
  9. 績效評價 Performance evaluation
    1. 監視、測量、分析和評價Monitoring, measurement, analysis and evaluation
    2. 內部稽核Internal audit
    3. 管理審查Management review
  10. 持續改進Improvement
    1. 概論General
    2. 不符合和矯正措施 Nonconformity and corrective action
    3. 持續改進Continual improvement

Chapter 4 組織的背景 Context of the organization

  • 4.1 理解組織及其背景
    • 組織應確定外部和內部那些與組織的宗旨、戰略方向有關並影響品質管制體系實現預期結果的能力的問題。組織應監視和評審這些外部和內部問題的資訊。
      • 注 1:理解外部環境可以促進考慮因法律、技術、競爭、市場、文化、社會和經濟環境所產生的問題,無論是國際、國家、地區或地方。
      • 注 2:理解內部環境可以促進考慮與價值觀、文化知識和組織績效相關的問題。
  • 4.1 Understanding the organization and its context.
    • The organization shall determine external and internal issues that are relevant to its purpose and its strategic direction and that affect its ability to achieve the intended result(s) of its quality management system. The organization shall monitor and review the information about these external and internal issues.
      • NOTE 1 Understanding the external context can be facilitated by considering issues arising from legal, technological, competitive, market, cultural, social, and economic environments, whether international, national, regional or local.
      • NOTE 2 Understanding the internal context can be facilitated by considering issues related to values, culture knowledge and performance of the organization.
  • 4.2 理解利益相關方的需求和期望
由於他們影響或潛在影響組織穩定地提供滿足顧客要求和適用的法律法規要求的產品的能力,組織應確定:
a) 與品質管制體系相關的利益相關方;
b) 與品質管制體系相關的利益相關方的要求。
組織應監視和審查這些利益相關方及其相關要求的資訊。
  • 4.2 Understanding the needs and expectations of interested parties
Due to their impact or potential impact on the organization’s ability to consistently provide products and services that meet customer 
and applicable statutory and regulatory requirements, the organization shall determine:
a) the interested parties that are relevant to the quality management system;
b) the requirements of these interested parties that are relevant to the quality management system.
The organization shall monitor and review the information about these interested relevant requirements.
  • 4.3 確定品質管制體系的範圍
組織應確定品質管制體系的邊界和適用性,以確定其範圍。在確定此範圍時,組織應考慮:
a) 4.1 所提及的外部和內部問題;
b) 4.2 所提及的利益相關方的要求;
c) 組織的產品和服務。
當本標準的要求在確定的範圍內可以應用,那麼它應被組織應用。如果本標準的任何要求不適用,這不應影響組織確保產品和服務合格的能力和責任。範圍應有效且保持作為文件資訊說明:
——品質管制體系覆蓋的產品和服務;
——任何本標準的要求不適用事例理由。
  • 4.3 Determining the scope of the quality management system
The organization shall determine the boundaries and applicability of the quality management system to establish its scope. 
When determining this scope, the organization shall consider:
a) the external and internal issues referred to in 4.1;
b) the requirements of relevant interested parties referred to in 4.2;
c) the products and services of the organization.
Where a requirement of this International Standard within the determined scope can be applied, then it shall be applied by the organization.
If any requirement(s) of this International Standard cannot be applied, this shall not affect the organization’s ability 
or responsibility to ensure conformity of products and services.
The scope shall be available and be maintained as documented information stating the:
——products and services covered by the quality management system;
——justification for any instance where a requirement of this International Standard cannot be applied.
  • 4.4 品質管制體系及其過程
組織應按本標準的要求建立、實施、保持和持續改進品質管制體系,包括所需的過程及其相互作用。 組織應確定品質管制體系所需的過程及其在整個組織中的應用,並應確定:
a) 這些過程的輸入要求和輸出期望;
b) 這些過程的順序和相互作用;
c) 所需的準則和方法,包括測量和相關的績效指標,以確保這些過程的有效運行和控制;
d) 所需的資源並確保它們的可用性;
e) 這些過程的職責和許可權分配;
f) 風險和機會按 6.1 的要求,並策劃和實施適當的行動來解決這些問題;
g) 這方法用於監視、測量,適用時,過程評價,如果需要,變更過程以確保他們達到預期結果;
h) 改進過程和品質管制體系的機會。
組織應保持文件化的資訊,在必要情況下支援過程操作,並保留必要程度的文件化資訊證實過程正在按策劃進行。
  • 4.4 Quality management system and its processes
The organization shall establish, implement,maintain and continually improve a quality management system, including the processes
needed and their interactions, in accordance with the requirements of this International Standard.
The organization shall determine the processes needed for the quality management system and their application throughout the organization 
and shall determine:
a) the inputs required and the outputs expected from these processes;
b) the sequence and interaction of these processes;
c) the criteria, methods, including measurements and related performance indicators needed to ensure the effective operation, 
and control of these processes;
d) the resources needed and ensure their availability;
e) the assignment of the responsibilities and authorities for these processes;
f) the risks and opportunities in accordance with the requirements of 6.1, and plan and implement the appropriate actions to address them;
g) the methods for monitoring, measuring, as appropriate, and evaluation of processes and, if needed, the changes to processes to ensure 
that they achieve intended results;
h) opportunities for improvement of the processes and the quality management system.
The organization shall maintain documented information to the extent necessary to support the operation of processes and retain documented 
information to the extent necessary to have confidence that the processes are being carried out as planned.

Chapter 5 領導 Leadership

  • 5.1 領導和承諾
    • 5.1.1 領導和對品質管制體系的承諾
最高管理者應通過以下活動表明領導作用和對品質管制體系的承諾:
a) 承擔品質管制體系有效性的責任;
b) 確保品質管制體系制定的品質政策和品質目標符合組織的戰略方向和環境;
c) 確保品質政策在組織內得到溝通、理解和應用;
d) 確保將品質管制體系的要求融入到組織的業務過程;
e) 增強過程方法的意識;
f) 確保品質管制體系所需資源的獲得;
g) 傳達有效品質管制和滿足品質管制體系要求的重要性;
h) 確保品質管制體系獲得其預期的結果;
i) 參與、指導和支持人員為品質管制體系有效性作貢獻;
j) 促進持續改進;
k) 支援其他管理者展示其領導作用,應用於他們各自職責領域。
注:本標準所提及的“業務”可以廣泛理解為那些活動是組織存在的目的的核心,該組織是否是公共的,私有的,以盈利為目的或不以盈利為目的。
  • 5.1 Leadership and commitment
    • 5.1.1 Leadership and commitment for the qualitymanagement system
Top management shall demonstrate leadership and commitment with respect to the quality management system by:
a) taking accountability of the effectiveness of the quality management system;
b) ensuring that the quality policy and quality objectives are established for the quality management system and
are compatible with the strategic direction and the context of the organization;
c) ensuring that the quality policy is communicated, understood and applied within the organization;
d) ensuring the integration of the quality management system requirements into the organization’s business processes;
e) promoting awareness of the process approach;
f) ensuring that the resources needed for the quality management system are available;
g) communicating the importance of effective quality management and of conforming to the quality management system requirements;
h) ensuring that the quality management system achieves its intended results;
i) engaging, directing and supporting persons to contribute to the effectiveness of the quality management system;
j) promoting continual improvement;
k) supporting other relevant management roles to demonstrate their leadership as it applies to their areas of responsibility.
NOTE Reference to “business” in this International Standard can be interpreted broadly to mean those activities 
that are core to the purposes of the organization’s existence; whether the organization is public, private, for profit or not for profit.
  • 5.1.2 以顧客為關注焦點
最高管理者應在以顧客為關注焦點方面展示領導作用和承諾,確保:
a) 顧客要求和適用的法律法規要求得到確定和滿足;
b) 可以影響產品和服務的符合性和增強顧客滿意的能力的風險和機遇得到確定和處理;
c) 關注持續提供滿足顧客和適用法律法規要求的產品和服務得到保持;
d) 關注增強顧客滿意得到保持。
  • 5.1.2 Customer focus
Top management shall demonstrate leadership and commitment with respect to customer focus by ensuring that:
a) customer requirements and applicable statutory and regulatory requirements are determined and met;
b) the risks and opportunities that can affect conformity of products and services and the ability to enhance customer satisfaction
are determined and addressed;
c) the focus on consistently providing products and services that meet customer and applicable statutory and regulatory requirements is maintained;
d) the focus on enhancing customer satisfaction is maintained.
  • 5.2 品質政策
    • 5.2.1 最高管理者應制定、評審和保持品質政策
a) 與組織的宗旨和背景相適應;
b) 提供設立和評審品質目標的框架;
c) 包括對滿足適用要求的承諾;
d) 包括對持續改進品質管制體系的承諾。
  • 5.2 Quality policy
    • 5.2.1 Top management shall establish, review and maintain a quality policy that:
a) is appropriate to the purpose and context of the organization;
b) provides a framework for setting and reviewing quality objectives;
c) includes a commitment to satisfy applicable requirements;
d) includes a commitment to continual improvement of the quality management system.
    • 5.2.2 品質政策應:
a) 可作為文件資訊;
b) 在組織內得到溝通、理解和應用;
c) 適用時,可被利益相關方獲得。
    • 5.2.2 The quality policy shall:
a) be available as documented information;
b) be communicated, understood and applied within the organization;
c) be available to relevant interested parties, as appropriate.
  • 5.3 組織角色、職責和許可權
最高管理者應確保相關角色的職責和許可權在組織內得到分配、溝通和理解。 最高管理者應分配職責許可權:
a) 確保品質管制體系符合本標準的要求;
b) 確保過程實現預期的結果;
c) 報告品質管制體系的績效、改進機會、所需的改變或創新,尤其是向最高管理者彙報;
d) 確保在整個組織內增強以顧客為關注焦點。
e) 確保在對品質管制體系的變更進行策劃和實施時,保持品質管制體系的完整性。
  • 5.3 Organizational roles, responsibilities and authorities
Top management shall ensure that the responsibilities and authorities for relevant roles are assigned, communicated 
and understood within the organization.
Top management shall assign the responsibility and authority for:
a) ensuring that the quality management system conforms to the requirements of this International Standard;
b) ensuring that the processes are delivering their intended outputs;
c) reporting on the performance of the quality management system, on opportunities for improvement and on the need for change or innovation,
and especially for reporting to top management;
d) ensuring the promotion of customer focus throughout the organization;
e) ensuring that the integrity of the quality management system is maintained when changes to the quality management system
are planned and implemented.

6 品質管制體系策劃 Planning for the quality management system

  • 6 品質管制體系策劃
    • 6.1 應對風險和機遇的措施
      • 6.1.1 在策劃品質管制體系時,組織應考慮 4.1提及的問題和 4.2 提及的要求,並確定需要處理的風險和機遇:
a) 給予保證品質管制體系可以實現其預期結果
b) 防止或減少負面效果
c) 實現持續改進。
  • 6 Planning for the quality management system
    • 6.1 Actions to address risks and opportunities
      • 6.1.1 When planning for the quality management system, the organization shall consider the issues referred to in 4.1 and the requirements referred to in 4.2 and determine the risks and opportunities that need to be addressed to:
a) give assurance that the quality management system can achieve its intended result(s);
b) prevent, or reduce, undesired effects;
c) achieve continual improvement.
      • 6.1.2 組織應策劃:
a) 應對這些風險和機會的措施;
b) 如何:
 1) 整合和實施措施融入品質管制體系的過程
 (見 4.4);
 2) 評價這些措施的有效性。
應對風險和機遇所採取的措施應與潛在影響產品和服務符合性相適應。
      • 6.1.2 The organization shall plan:
a) actions to address these risks and opportunities;
b) how to:
  1. integrate and implement the actions into its quality management system processes(see 4.4);
  2. evaluate the effectiveness of these actions.
Actions taken to address risks and opportunities shall be proportionate to the potential impact on the conformity of products and services.
    • 6.2 品質目標及其實現策劃
      • 6.2.1 組織應在相關職能、層次和過程中建立品質目標,品質目標應:
a) 與品質政策保持一致;
b) 可測量的;
c) 考慮到適用的要求;
d) 與產品和服務的符合性和增強顧客滿意相關
e) 可監視的;
f) 可傳達的;
g) 適用時可更新。
組織應保持關於品質目標的文件資訊。
  • 6.2 Quality objectives and planning to achieve them
    • 6.2.1 The organization shall establish quality objectives at relevant functions, levels and processes. The quality objectives shall:
a) be consistent with the quality policy,
b) be measurable;
c) take into account applicable requirements;
d) be relevant to conformity of products and services and the enhancement of customer satisfaction;
e) be monitored;
f) be communicated;
g) be updated as appropriate.
The organization shall retain documented information on the quality objectives.
    • 6.2.2 在策劃如何實現其品質目標時,組織應確定:
a) 做什麼;
b) 需要什麼資源;
c) 誰負責;
d) 何時完成;
e) 結果如何評價。
    • 6.2.2 When planning how to achieve its quality objectives, the organization shall determine:
a) what will be done;
b) what resources will be required;
c) who will be responsible;
d) when it will be completed;
e) how the results will be evaluated.
  • 6.3 變更策劃
當組織確定品質管制體系變更的必要性(見4.4),變更應有計劃的和系統的方式進行。組織應考慮:
a) 變更的目的和任何潛在的後果;
b) 品質管制體系的完整性;
c) 資源的可獲得性;
d) 職責和許可權的分配或再分配。
  • 6.3 Planning of changes
Where the organization determines the need for change to the quality management system (see 4.4) the change shall be carried out in a planned
and systematic manner. The organization shall consider:
a) the purpose of the change and any of its potential consequences;
b) the integrity of the quality management system;
c) the availability of resources;
d) the allocation or reallocation of responsibilities and authorities.

7 支援 Support

  • 7.1 資源
    • 7.1.1 總則
組織應確定並提供建立、實施、保持和持續改進品質管制體系所需的資源。 組織應考慮:
a) 現有內部資源的能力和限制;
b) 需要從外部供應商獲得什麼。
  • 7.1 Resources
    • 7.1.1 General
The organization shall determine and provide the resources needed for the establishment,implementation, maintenance and continual
improvement of the quality management system.
The organization shall consider:
a) the capabilities of, and constraints on, existing internal resources;
b) what needs to be obtained from external providers.
    • 7.1.2 人力資源
為了確保組織能夠持續滿足顧客和適用法律法規要求,組織應提供品質管制體系有效運行所需的人員,包括所需的過程。
    • 7.1.2 People
To ensure that the organization can consistently meet customer and applicable statutory and regulatory requirements,
the organization shall provide the persons necessary for the effective operation of the quality management including
the processes needed.
    • 7.1.3 基礎設施
組織應確定、提供並維護為達到產品和服務符合性其過程運行的基礎設施。
注:基礎設備可以包括:
a) 建築物和相關設施;
b) 包括硬體和軟體設備;
c) 運輸;
d) 資訊和通訊技術。
    • 7.1.3 Infrastructure
The organization shall determine, provide and maintain the infrastructure for the operation of its
processes to achieve conformity of products and services.
NOTE Infrastructure can include:
a) buildings and associated utilities;
b) equipment including hardware and software;
c) transportation;
d) information and communication technology.
    • 7.1.4 過程作業環境
組織應確定、提供和維護為其過程運行以及達到產品和服務符合性所需的環境。
注:過程作業環境可以包括物理的、社會的、心理的、環境的和其它因素,如溫度、濕度、人體工程學和清潔等。
    • 7.1.4 Environment for the operation of processes
The organization shall determine, provide and maintain the environment necessary for the operation of its processes
and to achieve conformity of products and services.
NOTE Environment for the operation of processes
can include physical, social, psychological,environmental and other factors (such as temperature, humidity, ergonomics
and cleanliness).
    • 7.1.5 監測和測量資源
用於監視或測量產品和服務符合規定要求的證據,組織應確定所需的資源確保有效的和真實可信的監視和測量結果。
組織應確保以下資源的提供:
a) 實施適宜的監視和測量活動的具體類型;
b) 維護確保其持續適合其目的。
組織應保持作為監視和測量資源目的適用性證據的適當的文件資訊。 測量可追溯性:
——法律或法規要求;
——顧客或利益相關方期望;
——或組織考慮為重要部分的測量結果有效性提供信心; 測量儀器應:
——對照能溯源的國標標準或國家標準的測量標準,按照規定的時間間隔或在使用前進行檢定或校準。
  當不存在上述標準時,用於校準或檢定的依據應作為文件資訊保留;
——識別,以確定其校準狀態;
——防止使校準狀態和隨後的測量結果失效的調整、損壞或變壞。
到不良影響,適用時,採取適當的矯正措施。
    • 7.1.5 Monitoring and measuring resources
Where monitoring or measuring is used for evidence of conformity of products and services to
specified requirements the organization shall determine the resources needed to ensure valid
and reliable monitoring and measuring results.
The organization shall ensure that the resources provided:
a) are suitable for the specific type of monitoring and measurement activities being undertaken;
b) are maintained to ensure their continued fitness for their purpose.
The organization shall retain appropriate documented information as evidence of fitness for
purpose of monitoring and measurement resources.
Where measurement traceability is: a statutory or regulatory requirement; a customer or relevant
interested party expectation; or considered by the organization to be an essential part of providing
confidence in the validity of measurement results;
measuring instruments shall be:
——verified or calibrated at specified intervals or prior to use against measurement standards
  traceable to international or national measurement standards. Where no such standards exist, the
  basis used for calibration or verification shall be retained as documented information;
——identified in order to determine their calibration status;
——safeguarded from adjustments, damage or deterioration that would invalidate the calibration
  status and subsequent measurement results.
The organization shall determine if the validity of previous measurement results has been adversely
affected when an instrument is found to be defective during its planned verification or calibration,
or during its use, and take appropriate corrective action as necessary.
    • 7.1.6 組織的知識
組織應確定其過程運行以及達到產品和服務符合性所需的知識。 應保持,並在必要範圍內獲得這知識。
在應對不斷變化的需求和趨勢時,組織應考慮其當前知識和確定如何獲得或獲取必要的額外知識。
注 1:組織的知識可以包括資訊,如智慧財產權和經驗教訓。
注 2:為了獲得所需的知識,組織可以考慮:
 a) 內部來源,例如:從失敗和成功的專案學習,獲取組織內非文件知識和熱門專家的經驗
 b) 外部來源,例如:標準、學術界、會議、收集顧客或供應商的知識。
    • 7.1.6 Organizational knowledge
The organization shall determine the knowledge necessary for the operation of its processes and to
achieve conformity of products and services.
This knowledge shall be maintained, and made available to the extent necessary.
When addressing changing needs and trends, the organization shall consider its current knowledge
and determine how to acquire or access the necessary additional knowledge.
NOTE 1 Organizational knowledge can include information such as intellectual property and
       lessons learned.
NOTE 2 To obtain the knowledge required, the organization can consider:
a) internal sources (e.g. learning from failures and successful projects, capturing undocumented
   knowledge and experience of topical experts within the organization);
b) external sources (e.g. standards, academia, conferences, gathering knowledge with
   customers or providers).
  • 7.2 能力
組織應:
a) 確定其控制下影響其品質績效的工作人員所需的能力;
b) 確保這些人員在適當的教育、培訓或經驗的基礎上能夠勝任;
c) 適用時,採取措施以獲得所需的能力,並評價所採取措施的有效性;
d) 保留作為能力證據的適當文件資訊。
注:適用的措施包括,例如:為當前聘用人員或勝任的雇用或合同人員提供培訓、輔導、雇傭或簽約可勝任的人員。
  • 7.2 Competence
The organization shall:
a) determine the necessary competence of person(s) doing work under its control that
   affects its quality performance;
b) ensure that these persons are competent on the basis of appropriate education, training, or
   experience;
c) where applicable, take actions to acquire the necessary competence, and evaluate the
   effectiveness of the actions taken;
d) retain appropriate documented information as evidence of competence.
NOTE Applicable actions can include, for example,the provision of training to, the mentoring of, or the
     reassignment of currently employed persons; or the hiring or contracting of competent persons.
  • 7.3 意識
在組織控制下工作的人員應認識到:
a) 品質政策;
b) 相關的品質目標;
c) 為品質管制體系的有效性作貢獻,包括提高品質績效的好處;
d) 不符合品質管制體系要求的含義。
  • 7.3 Awareness
Persons doing work under the organization’s control shall be aware of:
a) the quality policy;
b) relevant quality objectives;
c) their contribution to the effectiveness of the quality management system, including the
   benefits of improved quality performance;
d) the implications of not conforming with the quality management system requirements.
  • 7.4 溝通
組織應確定品質管制體系相關的內部和外部溝通,包括:
a) 溝通什麼;
b) 什麼時候溝通;
c) 與誰溝通;
d) 怎麼溝通。
  • 7.4 Communication
The organization shall determine the internal and external communications relevant to the quality
management system including:
a) on what it will communicate;
b) when to communicate;
c) with whom to communicate;
d) how to communicate.
  • 7.5 文件資訊
    • 7.5.1 總則
a) 本標準所需的文件資訊;
b) 組織確定作為品質管制體系的效性所需的文件資訊。
注:不同組織的品質管制體系文件資訊的多少與詳略程度可以不同,取決於:
a) 組織的規模和活動、過程、產品和服務的類型
b) 過程及其相互作用的複雜程度;
c) 人員的能力。
  • 7.5 Documented information
    • 7.5.1 General
The organization’s quality management system shall include
a) documented information required by this International Standard;
b) documented information determined by the organization as being necessary for the
effectiveness of the quality management system.
NOTE The extent of documented information for a quality management system can differ from one
      organization to another due to:
a) the size of organization and its type of activities, processes, products and services;
b) the complexity of processes and their interactions;
c) the competence of persons.
    • 7.5.2 創建和更新
當創建和更新文件資訊時,組織應確保適當的:
a) 識別和描述,例如:標題、日期、編制人或參考號碼;
b) 格式(如語言、軟體版本、圖像)和介質(如紙、電子);
c) 評審和批准的適宜性和充分性。
    • 7.5.2 Creating and updating
When creating and updating documented information the organization shall ensure appropriate:
a) identification and description (e.g. a title, date, author, or reference number);
b) format (e.g. language, software version, graphics) and media (e.g. paper, electronic);
c) review and approval for suitability andadequacy.
    • 7.5.3 文件資訊控制
      • 7.5.3.1 品質管制體系和本標準所要求的文件資訊應予以控制,以確保:
a) 在需要的地點和時間,它是可用的和適宜使用的;
b) 它是充分受保護的(如免受喪失保密性、使用不當,或失去完整性)。
    • 7.5.3 Control of documented Information
    • 7.5.3.1 Documented information required by the quality management system and by thisInternational Standard shall be controlled to ensure:
a) it is available and suitable for use, where and when it is needed;
b) it is adequately protected (e.g. from loss of confidentiality, improper use, or loss of integrity).
      • 7.5.3.2 對於文件資訊的控制,適用時,組織應專注於如下活動:
a) 分發、訪問、檢索和使用;
b) 貯存和保存,包括易讀性的保存;
c) 變更控制,如版本控制;
d) 保留和處置。
組織所確定的策劃和運行品質管制體系所需的外來文件資訊,應得到適當的識別和控制。
注:訪問可以意味著一個決定關於僅允許查看文件資訊,或允許和受權查看並變更文件資訊。
      • 7.5.3.2 For the control of documented information,the organization shall address the following activities, as applicable:
a) distribution, access, retrieval and use;
b) storage and preservation, including preservation of legibility;
c) control of changes (e.g. version control);
d) retention and disposition.
Documented information of external origin determined by the organization to be necessary for
the planning and operation of the quality management system shall be identified as
appropriate, and controlled.
NOTE Access can imply a decision regarding the permission to view the documented information
     only, or the permission and authority to view and change the documented information.

8 運作 Operation

  • 8.1 運作策劃和控制
組織應策劃、實施和控制過程,如 4.4 所述,需滿足所提供產品和服務的要求,並實施 6.1
所確定的措施,通過:
a) 確定產品和服務的要求;
b) 建立過程和產品及服務的接收準則;
c) 確定達成產品和服務要求的符合性所需的資源
d) 依照準則落實程序控制;
e) 保留在必要的情況下證實過程按策劃實施的文件資訊,以證明產品和服務符合要求。
這策劃的輸出應適合組織的運作。
組織應控制策劃的變更並評審意外變化的後果,適用時,採取措施減少任何不良影響。組織應確保外包過程按照 8.4 控制。
  • 8.1 Operational planning and control
The organization shall plan, implement and control the processes, as outlined in 4.4, needed to meet
requirements for the provision of products and services and to implement the actions determined
in 6.1, by:
a) determining requirements for the product and services;
b) establishing criteria for the processes and for the acceptance of products and services;
c) determining the resources needed to achieve conformity to product and service requirements;
d) implementing control of the processes in accordance with the criteria;
e) retaining documented information to the extent necessary to have confidence that the
   processes have been carried out as planned and to demonstrate conformity of products and
   services to requirements.
The output of this planning shall be suitable for the organization's operations.
The organization shall control planned changes and review the consequences of unintended
changes, taking action to mitigate any adverse effects, as necessary.
The organization shall ensure that outsourced processes are controlled in accordance with 8.4.
  • 8.2 產品和服務要求的確定
    • 8.2.1 顧客溝通
組織應在以下有關方面建立與顧客溝通的過程:
a) 有關產品和服務的資訊;
b) 問詢、合同或訂單的處理,包括對其變更;
c) 獲得顧客的意見和感覺,包括顧客抱怨;
d) 如適用,顧客財產的對待或處理;
e) 特殊要求的應急措施,當有關時。
  • 8.2 Determination of requirements for products and services
    • 8.2.1 Customer communication
The organization shall establish the processes for communicating with customers in relation to:
a) information relating to products and services;
b) enquiries, contracts or order handling, including changes;
c) obtaining customer views and perceptions, including customer complaints;
d) the handling or treatment of customer property, if applicable;
e) specific requirements for contingency actions, when relevant.
    • 8.2.2 與產品和服務有關的要求的確定
組織應建立、實施和保持一個過程來確定提供給潛在顧客的產品和服務的要求。 組織應確保:
a) 確定產品和服務要求(包括那些組織認為是必要的),和適用於法律法規要求;
b) 其有能力滿足規定的要求,並證實其所提供的產品和服務的要求。
    • 8.2.2 Determination of requirements related to products and services
The organization shall establish, implement and maintain a process to determine the requirements
for the products and services to be offered to potential customers. The organization shall ensure
that:
a) product and service requirements (including those considered necessary by the
   organization), and applicable statutory and regulatory requirements, are defined;
b) it has the ability to meet the defined requirements and substantiate the claims for the products and
   services it offers.
    • 8.2.3 與產品和服務有關的要求的評審
適用時,組織應評審:
a) 顧客規定的要求,包括交付和交付後活動的要求;
b) 顧客雖然沒有明示,但規定用途或已知的預期用途所必要的要求;
c) 適用於產品和服務的附加法律法規要求;
d) 與以前表述不一致的合同或訂單的要求。
注:要求也可以包括那些來源於利益相關方。
評審應在組織向顧客作出提供產品和服務的承諾之前進行,並確保與以前定義不一致的合同或訂單要求已得到解決。
若顧客沒有提供形成文件的要求,組織在接受顧客要求前應對顧客要求進行確認。
描述評審結果文件資訊,包括任何對產品和服務的新的或變更的要求的文件資訊,都應保留。若產品和服務的要求發生變更,組織應確
保相關文件資訊得到修改,並確保相關人員知道已變更的要求。
    • 8.2.3 Review of requirements related to products and services
The organization shall review, as applicable:
a) requirements specified by the customer, including the requirements for delivery and
   post-delivery activities;
b) requirements not stated by the customer, but necessary for the customers' specified or
   intended use, when known;
c) additional statutory and regulatory requirements applicable to the products and services;
d) contract or order requirements differing from those previously expressed.
NOTE Requirements can also include those arising from relevant interested parties.
This review shall be conducted prior to the organization’s commitment to supply products and
services to the customer and shall ensure contract or order requirements differing from those
previously defined are resolved.
Where the customer does not provide a documented statement of their requirements, the
customer requirements shall be confirmed by the organization before acceptance.
Documented information describing the results of the review, including any new or changed
requirements for the products and services, shall be retained.
Where requirements for products and services are changed, the organization shall ensure that
relevant documented information is amended and that relevant personnel are made aware of the
changed requirements.
  • 8.3 產品和服務的設計與開發
    • 8.3.1 總則
當組織的產品和服務的詳細要求沒有建立,或者顧客或其他利益相關方沒有定義,以致它們足夠為後續生產和服務提供時,組織應建立、
實施和保持設計和開發過程。
注 1:組織也可以使用 8.5 所給出的要求進行產品和服務提供過程的開發。
注 2:因此,組織可以選擇一起考慮 8.3 和 8.5的要求。
  • 8.3 Design and development of products and services
    • 8.3.1 General
Where the detailed requirements of the organization’s products and services are not
already established or not defined by the customer or by other interested parties, such that they are
adequate for subsequent production or service provision, the organization shall establish,
implement and maintain a design and development process.
NOTE 1 The organization can also apply the requirements given in 8.5 to the development of
       processes for production and services provision
NOTE 2 For services, design and development planning can address the whole service delivery
       process. The organization can therefore choose to consider the requirements of clauses 8.3 and 8.5
       together.
    • 8.3.2 設計和開發策劃
在確定設計和開發的階段和控制,組織應考慮:
a) 設計和開發活動的性質、持續時間和複雜性
b) 要求指定的特殊過程階段,包括適用的設計和開發評審;
c) 必要的設計和開發驗證和確認;
d) 參與設計和開發過程的職責和許可權;
e) 需控制在設計和開發過程中個人與團體之間的介面;
f) 在設計和開發過程中顧客和用戶群所需的參與;
g) 確認已達到設計和開發要求必要的文件信息
    • 8.3.2 Design and development planning
In determining the stages and controls for design and development, the organization shall consider:
a) the nature, duration and complexity of the design and development activities;
b) requirements that specify particular process stages, including applicable design and
   development reviews;
c) the required design and development verification and validation;
d) the responsibilities and authorities involved in the design and development process;
e) the need to control interfaces between individuals and parties involved in the design
   and development process;
f) the need for involvement of customer and user groups in the design and development process;
g) the necessary documented information to confirm that design and development
   requirements have been met.
    • 8.3.3 設計和開發輸入
組織應確定:
a) 產品和服務的特定類型所必需的設計與開發要求,適用時,包括功能和性能要求;
b) 適用的法律法規要求;
c) 組織已承諾實施的執行標準或準則;
d) 產品和服務的設計與開發所需的內部和外部資源;
e) 由於產品和服務的性質引起的潛在失敗後果
f) 顧客和其他利益相關方對設計和開發的期望的控制水準;
輸入應對設計和開發的目的是充分的,完整和明確的,應解決輸入間的自相矛盾。
    • 8.3.3 Design and development Inputs
The organization shall determine:
a) requirements essential for the specific type of products and services being designed and
   developed, including, as applicable, functional and performance requirements;
b) applicable statutory and regulatory requirements;
c) standards or codes of practice that the organization has committed to implement;
d) internal and external resource needs for the design and development of products and
   services;
e) the potential consequences of failure due to the nature of the products and services;
f) the level of control expected of the design and development process by customers and other
   relevant interested parties.
Inputs shall be adequate for design and development purposes, complete, and unambiguous.
Conflicts among inputs shall be resolved.
    • 8.3.4 設計和開發控制
控制應用於設計和開發的過程應確保:
a) 通過設計和開發活動所取得的結果有明確定義
b) 設計和開發評審按策劃進行;
c) 執行驗證以確保設計和開發輸出滿足設計和開發輸入要求;
d) 執行確認以確保產生的產品和服務能夠滿足規定的使用要求或已知的預期用途的要求。
    • 8.3.4 Design and development controls
The controls applied to the design and development process shall ensure that:
a) the results to be achieved by the design and development activities are clearly defined;
b) design and development reviews are conducted as planned;
c) verification is conducted to ensure that the design and development outputs have met the
   design and development input requirements;
d) validation is conducted to ensure that the resulting products and services are capable of
   meeting the requirements for the specified application or intended use (when known).
    • 8.3.5 設計和開發輸出
組織應確保設計和開發輸出:
a) 滿足設計和開發輸入的要求;
b) 足夠滿足產品和服務提供的後續過程;
c) 確保產品的生產或服務的提供符合預期目的和它們的安全與正常使用。
 組織應保留在設計和開發過程中產生的文件資訊。
    • 8.3.5 Design and development outputs
The organization shall ensure that design and development outputs:
a) meet the input requirements for design and development;
b) are adequate for the subsequent processes for the provision of products and services;
c) include or reference monitoring and measuring requirements, and acceptance criteria, as applicable;
d) ensure products to be produced, or services to be provided, are fit for intended purpose and
   their safe and proper use.
The organization shall retain the documented information resulting from the design and development process.
    • 8.3.6 設計和開發變更
組織應評審、控制和識別在產品和服務的設計與開發期間對設計輸入和設計輸出所作的變更,或所作的變更在隨後的範圍內沒有要求符
合性的不良影響。
應保留關於設計和開發變更的文件資訊。
    • 8.3.6 Design and development changes
The organization shall review, control and identify changes made to design inputs and design outputs
during the design and development of products and services or subsequently, to the extent that there is
no adverse impact on conformity to requirements.
Documented information on design and development changes shall be retained.
  • 8.4 外部供應產品和服務的控制
    • 8.4.1 總則
組織應確保外部供應過程、產品和服務符合規定的要求。 組織應應用規定的要求對外部供應的產品和服務進行控制,當:
a) 外部供應商提供的產品和服務構成組織自己的產品和服務;
b) 外部供應商代表組織直接提供產品和服務給顧客;
c) 過程或過程的一部分是由外部供應商提供作為組織決定外包一個過程或一個功能的結果;
組織應制定和應用根據外部供應商按規定的要求提供過程、產品或服務的能力進行評價、選擇、績效監視和外部供應商重新評價的準則。
組織應保留適當的評價結果、績效監視和外部供應商重新評價的文件資訊。
  • 8.4 Control of externally provided products andservices
    • 8.4.1 General
The organization shall ensure that externally provided processes, products, and services
conform to specified requirements.
The organization shall apply the specified requirements for the control of externally provided
products and services when:
a) products and services are provided by externalproviders for incorporation into the
   organization’s own products and services;
b) products and services are provided directly to the customer(s) by external providers on behalf
   of the organization;
c) a process or part of a process is provided by an external provider as a result of a decision by
   the organization to outsource a process or function.
The organization shall establish and apply criteria for the evaluation, selection, monitoring of
performance and re-evaluation of external providers based on their ability to provide
processes or products and services in accordance with specified requirements.
The organization shall retain appropriate documented information of the results of the
evaluations, monitoring of the performance evaluations of the external providers.
    • 8.4.2 外部供應的控制類型和程度
在確定應用於過程、產品和服務的外部供應商的控制類型和程度,組織應考慮:
a) 外部供應的過程、產品和服務對組織持續滿足顧客和適用的法律法規要求的能力的潛在影響
b) 施加於外部供應商控制的感知的有效性。
組織應確定並實施驗證或其他必要的活動,以確保外部供應的過程、產品和服務對組織持續
交付合格產品和服務給其顧客的能力沒有不良影響。
已外包給外部供應商保留在組織品質管制體系範圍內的組織的過程或功能,相應地,組織應
考慮上面的 a)和 b),並確定兩者控制其擬應用於外部供應商和那些其擬應用於產生的過程輸出。
    • 8.4.2 Type and extent of control of external provision
In determining the type and extent of controls to be applied to the external provision of processes,
products and services, the organization shall take into consideration:
a) the potential impact of the externally provided processes, products and services on the
organization’s ability to consistently meet customer and applicable statutory and regulatory requirements;
b) the perceived effectiveness of the controls applied by the external provider.
The organization shall establish and implement verification or other activities necessary to ensure
the externally provided processes, products and services do not adversely affect the organization’s
ability to consistently deliver conforming products and services to its customers.
Processes or functions of the organization which have been outsourced to an external provider
remain within the scope of the organization’s quality management system; accordingly, the
organization shall consider a) and b) above and define both the controls it intends to apply to the
external provider and those it intends to apply to the resulting process output.
    • 8.4.3 外部供應商的資訊
組織應與外部供應商溝通以下適用的要求:
a) 代表組織提供的產品和服務或實施的過程;
b) 產品和服務、方法、過程或設備的批准或放行;
c) 人員的能力,包括必要的資格;
d) 他們與組織的品質管制體系的相互作用;
e) 組織應用於外部供應商績效的控制和監視;
f) 組織或者其顧客在外部供方許可之下進行的驗證活動
在與外部供應商溝通前,組織應確保規定的要求是充分與適宜的。
    • 8.4.3 Information for external providers
The organization shall communicate to external providers applicable requirements for the following:
a) the products and services to be provided or the processes to be performed on behalf of the
   organization;
b) approval or release of products and services, methods, processes or equipment;
c) competence of personnel, including necessary qualification;
d) their interactions with the organization's quality management system;
e) the control and monitoring of the external provider’s performance to be applied by the
   organization;
f) verification activities that the organization, or its customer, intends to perform at the external
   provider’s premises.
The organization shall ensure the adequacy of specified requirements prior to their communication
to the external provider.
  • 8.5 產品和服務提供
    • 8.5.1 產品和服務提供的控制
組織應實施生產和服務提供的受控條件,包括交付和交付後活動。 適用時,受控條件應包括:
a) 獲得定義產品和服務特性的文件資訊;
b) 獲得定義實施活動和達成結果的文件資訊;
c) 監視和測量活動在適當階段驗證過程和過程輸出的控制,並滿足產品和服務的接收準則;
d) 使用和控制適宜的基礎設施和過程環境;
e) 獲得和使用適宜的監視和測量資源;
f) 人員的能力,適用時,以及人員所需的資格
g) 當產生的輸出不能由後續的監視或測量加以驗證,確認和定期確認任何生產和服務提供
   過程實現所策劃的結果的能力;
h) 實施產品和服務放行、交付和交付後活動。
  • 8.5 Production and service provision
    • 8.5.1 Control of production and service provision
The organization shall implement controlled conditions for production and service provision,
including delivery and post-delivery activities.
Controlled conditions shall include, as applicable:
a) the availability of documented information that defines the characteristics of the products and
   services;
b) the availability of documented information that defines the activities to be performed and the
   results to be achieved;
c) monitoring and measurement activities at appropriate stages to verify that criteria for
   control of processes and process outputs, and acceptance criteria for products and services,
   have been met.
d) the use, and control of suitable infrastructure and process environment;
e) the availability and use of suitable monitoring and measuring resources;
f) the competence and, where applicable, required qualification of persons;
g) the validation, and periodic revalidation, of the ability to achieve planned results of any
   process for production and service provision where the resulting output cannot be verified by
   subsequent monitoring or measurement;
h) the implementation of products and services release, delivery and post-delivery activities.
    • 8.5.2 標識和可追溯性
當有必要確保產品和服務的符合性時,組織應使用適宜的方法識別過程輸出。 組織應在產品
和服務提供的全過程中,針對監視和測量要求識別過程輸出的狀態。
在有可追溯性要求的場合,組織應控制過程輸出的唯一性標識,並保留任何必要的文件資
訊,以保持可追溯性。
注:過程輸出是準備交付給組織的顧客或內部顧客(如輸入到下一個過程的接受者)的任何活動的結果,
  他們可以包括產品、服務、中間部件、元件等等。
    • 8.5.2 Identification and traceability
Where necessary to ensure conformity of products and services, the organization shall use suitable
means to identify process outputs.
The organization shall identify the status of process outputs with respect to monitoring and
measurement requirements throughout production and service provision.
Where traceability is a requirement, the organization shall control the unique identification
of the process outputs, and retain any documented information necessary to maintain traceability.
NOTE Process outputs are the results of any activities which are ready for delivery to the
  organization’s customer or to an internal customer(e.g. receiver of the inputs to the next process);
  they can include products, services, parts, components, etc.
    • 8.5.3 屬於顧客或外部供應商的財產
組織應愛護在組織控制下或組織使用的屬於顧客或外部供應商的財產。組織應識別、驗證、
保護和維護供其使用或構成其產品和服務的顧客或外部供應商財產。
當顧客或外部供應商財產發生不正確使用、丟失、損壞、或發現不適用的情況,組織應向顧
客或外部供應商報告。
注:顧客財產可包括物料、元件、工具和設備、顧客場所、智慧財產權和個人資訊。
    • 8.5.3 Property belonging to customers or external providers
The organization shall exercise care with property belonging to the customer or external providers
while it is under the organization's control or being used by the organization. The organization shall
identify, verify, protect and safeguard the customer’s or external provider’s property provided
for use or incorporation into the products and services.
When property of the customer or external provider is incorrectly used, lost, damaged or otherwise
found to be unsuitable for use, the organization shall report this to the customer or external
provider.

NOTE Customer property can include material, components, tools and equipment, customer

 premises, intellectual property and personal data.
    • 8.5.4 防護:
組織應確保在生產和服務輸出期間提供過程防護,以在必要的範圍內保持符合要求。
注:防護可以包括標識、處理、包裝、貯存、傳輸或運輸和保護。
    • 8.5.4 Preservation
The organization shall ensure preservation of process outputs during production and service
provision, to the extent necessary to maintain conformity to requirements.
NOTE Preservation can include identification, handling, packaging, storage, transmission or
transportation, and protection.
    • 8.5.5 交付後活動
如適用,組織應滿足與產品和服務相關的交付後活動的要求。 在確定所需交付後活動的範圍,
組織應考慮:
a) 與產品和服務有關的風險;
b) 產品和服務的性質、使用和預期的生命週期
c) 顧客回饋;
d) 法律法規要求。
注:交付後活動可以包括在保修條款內的措施、合同義務如維護服務和回收或最終處置的輔助服務。
    • 8.5.5 Post-delivery activities
As applicable, the organization shall meet requirements for post-delivery activities associated
with the products and services.
In determining the extent of post-delivery activities that are required, the organization shall consider:
a) the risks associated with the products and services;
b) the nature, use and intended lifetime of the products and services;
c) customer feedback;
d) statutory and regulatory requirements.
NOTE Post-delivery activities can include actions under warranty provisions, contractual obligations
     such as maintenance services, and supplementary services such as recycling or final disposal.
    • 8.5.6 變更控制
組織應評審和控制生產或服務提供必需的未策劃變更,以在必要的範圍內確保持續符合規定
的要求。 組織應保留描述變更的評審結果、授權更改人員和任何必要措施的文件資訊。
    • 8.5.6 Control of changes
The organization shall review and control unplanned changes essential for production or
service provision to the extent necessary to ensure continuing conformity with specified requirements.
The organization shall retain documented information describing the results of the review of
changes, the personnel authorizing the change, and any necessary actions.
  • 8.6 產品和服務的放行
組織應在適當階段實施所策劃的安排,以驗證產品和服務的要求已得到滿足。應保留符合接
收準則的證據。除非得到有關授權人員的批准,適用時得到顧客的批准,否則在策劃安排
的符合性驗證已圓滿完成之前,不應向顧客放行產品和服務。
文件資訊應提供可追溯有權放行產品和服務以交付給顧客的人員。
  • 8.6 Release of products and services
The organization shall implement the planned arrangements at appropriate stages to verify that
product and service requirements have been met.
Evidence of conformity with the acceptance criteria shall be retained.
The release of products and services to the customer shall not proceed until the planned
arrangements for verification of conformity have been satisfactorily completed, unless otherwise
approved by a relevant authority and, as applicable, by the customer. Documented
information shall provide traceability to the person(s) authorizing release of products and
services for delivery to the customer.
  • 8.7 不合格過程輸出、產品和服務的控制
組織應確保不符合要求的過程輸出、產品和服務得到識別和控制,以防止其非預期的使用或
交付。組織應依據不合格的性質及其對產品和服務符合性的影響,採取適當的矯正措施。這
也適用於在產品交付後或服務提供期間發現產品和服務不合格時。適用時,組織應通過下列
一種或幾上途徑處置不合格的過程輸出、產品和服務:
a) 矯正;
b) 隔離、限制、退貨或暫停提供產品和服務;
c) 通知顧客;
d) 獲得授權:
——照常使用
——放行、繼續或重新提供產品和服務;
——讓步接收。
在不合格的過程輸出、產品和服務得到矯正之後應驗證其符合要求。
組織應保留不合格的過程輸出、產品和服務所採取的措施的文件資訊,包括獲得的任何讓步
和作出關於處置不合格的決定的人員或授權的文件資訊。
  • 8.7 Control of nonconforming process outputs,products and services
The organization shall ensure process outputs, products and services that do not conform to
requirements are identified and controlled to prevent their unintended use or delivery.
The organization shall take appropriate corrective action based on the nature of the nonconformity
and its impact on the conformity of products and services. This applies also to nonconforming
products and services detected after delivery of the products or during the provision of the service.
As applicable, the organization shall deal with nonconforming process outputs, products and
services in one or more of the following ways:
a) correction;
b) segregation, containment, return or suspension of provision of products and services;
c) informing the customer;
d) obtaining authorization for:
——use “as-is’;
——release, continuation or re-provision of the products and services;
——acceptance under concession.
Where nonconforming process outputs, products and services are corrected, conformity to the
requirements shall be verified.
The organization shall retain documented information of actions taken on nonconforming
process outputs, products and services, including on any concessions obtained and on the person or
authority that made the decision regarding dealing with the nonconformity.

9 績效評價 Performance evaluation

  • 9.1.1 總則
組織應確定:
a) 需要監視和測量什麼;
b) 監視、測量、分析和評價的方法,適用時,以確保有效的結果;
c) 何時執行監視和測量;
d) 何時分析與評價監視和測量的結果;
組織應確保監視和測量活動按照規定的要求實施,並應保留作為結果的證據的適當的文件資
訊。組織應評價品質績效和品質管制體系的有效性。
  • 9.1 Monitoring, measurement, analysis and evaluation
    • 9.1.1 General
The organization shall determine:
a) what needs to be monitored and measured;
b) the methods for monitoring, measurement, analysis and evaluation, as applicable, to
   ensure valid results;
c) when the monitoring and measuring shall be performed;
d) when the results from monitoring and measurement shall be analyzed and evaluated.
The organization shall ensure that monitoring and measurement activities are implemented in
accordance with the determined requirements and shall retain appropriate documented information as
evidence of the results.
The organization shall evaluate the quality performance and the effectiveness of the quality
management system.
    • 9.1.2 顧客滿意
組織應監視滿足顧客要求的顧客感受度。
組織應獲取關於顧客對組織及其產品和服務的看法和意見的相關資訊。 確定獲取和利用這種資訊的方法。
注:有關顧客看法的資訊可以包括顧客滿意度或意見調查、關於交付產品或服務品質的顧客
  資料、市場份額分析、讚揚、索賠和經銷商報告。
    • 9.1.2 Customer satisfaction
The organization shall monitor customer perceptions of the degree to which requirements
have been met.
The organization shall obtain information relating to customer views and opinions of the organization
and its products and services.
The methods for obtaining and using this information shall be determined.
NOTE Information related to customer views can include customer satisfaction or opinion surveys,
customer data on delivered products or services quality, market-share analysis, compliments,
warranty claims and dealer reports.
    • 9.1.3 分析和評價
組織應分析和評價來自監視、測量和其他來源的適當的資料和資訊。 分析和評價的輸出應用於:
a) 證實產品和服務符合要求;
b) 評價和增強顧客滿意;
c) 確保品質管制體系的符合性和有效性;
d) 證實策劃已成功實現;
e) 評價過程的績效;
f) 評價外部供應商的績效;
g) 確定品質管制體系的需求或改進機會。
    • 9.1.3 Analysis and evaluation
The organization shall analysis and evaluate appropriate data and information arising from
monitoring, measurement and other sources.
The output of analysis and evaluation shall be used to:
a) demonstrate conformity of products and services to requirements;
b) assess and enhance customer satisfaction;
c) ensure conformity and effectiveness of the quality management system;
d) demonstrate that planning has been successfully implemented;
e) assess the performance of processes;
f) assess the performance of external provider(s);
g) determine the need or opportunities for improvements within the quality management system.
The results of analysis and evaluation shall also be used to provide inputs to management review.
  • 9.2 內部審核
    • 9.2.1 組織應按策劃的時間間隔進行內部審核,以提供關於品質管制體系的資訊是否:
a) 符合:
 1) 組織自身的品質管制體系的要求;
 2) 本標準的要求;
b) 得到有效實施和保持。
  • 9.2 Internal audit
    • 9.2.1 The organization shall conduct internal audits at planned intervals to provide information on whether the quality management system;
a) conforms to:
 1) the organization’s own requirements for its quality management system;
 2) the requirements of this International Standard;
b) is effectively implemented and maintained.
  • 9.2.2 組織應:
a) 策劃、建立、實施和保持包括頻次、方法、職責、策劃要求和報告的審核方案,審核方案
   應考慮品質目標、有關過程的重要性、顧客回饋、變更對組織的影響和以往審核的結果。
b) 規定每次審核的準則和範圍;
c) 選擇審核員和實施審核應確保審核過程的客觀性和公正性;
d) 確保審核結果報告給相關管理層;
e) 及時採取必要的矯正和矯正措施;
f) 保留作為審核方案和審核結果實施證據的文件資訊。
    • 9.2.2 The organization shall:
a) plan, establish, implement and maintain an audit programme(s) including the frequency,
   methods, responsibilities, planning requirements and reporting, which shall take
   into consideration the quality objectives, the importance of the processes concerned,
   customer feedback, changes impacting on the organization, and the results of previous
   audits;
b) define the audit criteria and scope for each audit;
c) select auditors and conduct audits to ensure objectivity and the impartiality of the audit
   process;
d) ensure that the results of the audits are reported to relevant management;
e) take necessary correction and corrective actions without undue delay;
f) retain documented information as evidence of the implementation of the audit programme
   and the audit results.
  • 9.3 管理評審
    • 9.3.1 最高管理者應按策劃的時間間隔評審品質管制體系,以確保其持續的適宜性、充分性和有效性。
策劃和實施管理評審應考慮:
a) 以往管理評審措施的狀況;
b) 相關的品質管制體系包括其戰略方向的內部和外部問題的變化;
c) 關於品質績效的資訊,包括趨勢和指標:
  1) 不合格和矯正措施;
  2) 監視和測量結果;
  3) 審核結果;
  4) 顧客滿意;
  5) 關於外部供應商和其他利益相關方的問題
  6) 保持一個有效的品質管制體系所需資源的充足性;
  7) 過程的績效和產品與服務的符合性;
d) 為應對風險和機遇所採取措施的有效性(見6.1);
e) 新的潛在的持續改進機會。
  • 9.3 Management review
    • 9.3.1 Top management shall review the organization's quality management system, at planned intervals, to ensure its continuing suitability, adequacy, and effectiveness.
The management review shall be planned and carried out taking into consideration:
a) the status of actions from previous management reviews;
b) changes in external and internal issues that are relevant to the quality management system
   including its strategic direction;
c) information on the quality performance, including trends and indicators for:
  1) nonconformities and corrective actions;
  2) monitoring and measurement results;
  3) audit results;
  4) customer satisfaction;
  5) issues concerning external providers and other relevant interested parties;
  6) adequacy of resources required for maintaining an effective quality management system;
  7) process performance and conformity of products and services;
d) the effectiveness of actions taken to address risks and opportunities (see clause 6.1);
e) new potential opportunities for continual improvement.
    • 9.3.2 管理評審的輸出應包括以下有關的決定和措施:
a) 持續改進的機會;
b) 品質管制體系變更的任何需求,包括資源需求。
組織應保留作為管理評審結果證據的文件資訊。
    • 9.3.2 The outputs of the management review shall include decisions and actions related to:
a) continual improvement opportunities;
b) any need for changes to the quality management system, including resource needs.
The organization shall retain documented information as evidence of the results of
management reviews.

10 改進 Improvement

  • 10.1 總則
組織應確定和選擇改進機會並實施必要的措施以滿足顧客要求和增強顧客滿意。適用時,應
包括:
a) 改進過程防止不合格;
b) 改進產品和服務以滿足已知和預知的要求;
c) 改進品質管制體系結果。
注:改進可以造成被動地(如矯正措施)、逐漸地(如持續改進)、跳躍變化(如突破)、
   創造性地(如創新)或重組(如轉型)影響。
  • 10.1 General
The organization shall determine and select opportunities for improvement and implement
necessary actions to meet customer requirements and enhance customer satisfaction. This shall
include, as appropriate:
a) improving processes to prevent nonconformities;
b) improving products and services to meet known and predicted requirements;
c) improving quality management system results.
NOTE Improvement can be effected reactively (e.g. corrective action), incrementally (e.g. continual
     improvement), by step change (e.g. breakthrough), creatively (e.g. innovation) or by re-organization
    (e.g. transformation).
  • 10.2 不合格和矯正措施
    • 10.2.1 當不合格產生時,包括由抱怨引起的不合格,
組織應:
a) 應對不合格,適用時:
  1) 採取措施控制和矯正不合格;
  2) 應對後果;
b) 評價消除不合格原因所需的措施,以便不合格不再發生或發生在其他地方,通過:
  1) 評審不合格;
  2) 確定不合格的原因;
  3) 確定是否存在類似的不合格或有可能發生
c) 實施任何所需的措施;
d) 評審所採取的任何矯正措施的有效性;
e) 對品質管制體系進行變更,如有必要,矯正措施應與所遇到不合格的影響程度相適應。
注 1:在某些情況下,矯正措施可以是不可能消除不合格的原因。
注 2:矯正措施可以減少再發生的可能性到一個可以接受的水準。
  • 10.2 Nonconformity and corrective action
    • 10.2.1 When a nonconformity occurs, includingthose arising from complaints,
the organization shall:
a) react to the nonconformity, and as applicable:
  1) take action to control and correct it;
  2) deal with the consequences;
b) evaluate the need for action to eliminate the cause(s) of the nonconformity, in order that it does
   not recur or occur elsewhere, by:
  1) reviewing the nonconformity;
  2) determining the causes of the nonconformity;
  3) determining if similar nonconformities exist, or could potentially occur;
c) implement any action needed;
d) review the effectiveness of any corrective action taken;
e) make changes to the quality management system, if necessary.
   Corrective actions shall be appropriate to the effects of the nonconformities encountered.
NOTE 1 In some instances, it can be impossible to eliminate the cause of a nonconformity.
NOTE 2 Corrective action can reduce the likelihood of recurrence to an acceptable level.
    • 10.2.2 組織應保留以下文件資訊為作證據:
a) 不合格的性質和任何後續採取的措施;
b) 任何矯正措施的結果。
    • 10.2.2 The organization shall retain documented information as evidence of:
a) the nature of the nonconformities and any subsequent actions taken;
b) the results of any corrective action.
  • 10.3 持續改進
組織應持續改進品質管制體系的適宜性、充分性和有效性。
組織應考慮分析與評價輸出和管理評審輸出,以確認是否存在表現不佳的領域或應處理的機
會,作為持續改進的一部分。
適用時,組織應選擇和使用適用的工具和方法
對表現不佳的原因進行調查和支持持續改進。
  • 10.3 Continual improvement
The organization shall continually improve the suitability, adequacy, and effectiveness of the
quality management system.
The organization shall consider the outputs of analysis and evaluation, and the outputs from
management review, to confirm if there are areas of underperformance or opportunities that shall be
addressed as part of continual improvement.
Where applicable, the organization shall select and utilise applicable tools and methodologies for
investigation of the causes of underperformance and for supporting continual improvement.