「HYTREL製程改善」:修訂間差異

出自TSK WIKI
跳至導覽 跳至搜尋
Tpl​(留言 | 貢獻)
Tpl​(留言 | 貢獻)
第17行: 第17行:
*導体預熱 off -> 微溫40A/5.5V
*導体預熱 off -> 微溫40A/5.5V
*真空吸引  -> <span style="color:red">0.45</span>
*真空吸引  -> <span style="color:red">0.45</span>
*[https://youtu.be/sTF7yeGzbXY 開機錄影]
*DDR
*DDR
**(2.7^2-1.5^2)/(0.7^2-0.4^2)=15.27 ->
**(2.7^2-1.5^2)/(0.7^2-0.4^2)=15.27 ->
第27行: 第30行:
*(2.7/0.7)/(1.5/0.4)=1.105
*(2.7/0.7)/(1.5/0.4)=1.105
*https://dl.dropboxusercontent.com/s/vpimijbzuoe2nmh/PDFXEdit_2016-12-29_17-06-21.png
*https://dl.dropboxusercontent.com/s/vpimijbzuoe2nmh/PDFXEdit_2016-12-29_17-06-21.png
*[https://youtu.be/sTF7yeGzbXY 開機錄影]


==杜邦技術資料==
==杜邦技術資料==

於 2016年12月30日 (五) 09:41 的修訂

20161229

  • 溫度
    • 機頭260 -> 270
    • 洩料250 -> 260
    • 一段220 -> 230
    • 二段230 -> 240
    • 三段240 -> 250
  • 眼模
    • 內眼模2.7mm -> 2.9mm
    • 外眼模0.6mm/1.5mm ->
  • 間格 1 -> 0
  • 連動 -> 連動(原連動調不到轉速,廠長指導後可用連動)
  • 螺旋轉速rpm 21.7 -> 46.8
  • 引取轉速rpm 476 -> 551
  • 線速120 -> 145
  • 外徑測定器0.73 -> 0.73
  • 導体預熱 off -> 微溫40A/5.5V
  • 真空吸引 -> 0.45
  • DDR
  • DDB
  • (2.7/0.7)/(1.5/0.4)=1.03
  • (2.7/0.7)/(1.5/0.4)=1.105
  • PDFXEdit_2016-12-29_17-06-21.png

杜邦技術資料

  • (L/D) ratio ideally 24:1
  • The optimum draw-down ratio (D.D.R.) is in the range of 5–20:1
  • The extruder die should be between 2 and 3 times the required tube outside diameter
  • Vacuum of 0.10 to 0.30 bar has been used successfully to maintain
  • PDFXEdit_2016-12-29_16-14-03.png
  • PDFXEdit_2016-12-29_16-13-16.png
  • PDFXEdit_2016-12-29_16-13-34.png