「卷線測試項目」:修訂間差異
跳至導覽
跳至搜尋
| 第14行: | 第14行: | ||
*將卷長長度L1拉伸到3倍,置放72小時候,將卷線長度恢復到原來位置L2,量測其變化率不得大於20%,TSK的測試數據為18%左右。 | *將卷長長度L1拉伸到3倍,置放72小時候,將卷線長度恢復到原來位置L2,量測其變化率不得大於20%,TSK的測試數據為18%左右。 | ||
==卷線英文說明== | ==卷線英文說明== | ||
*Coil cords are formed by spirally wrapping cable around a metal mandrel, heating to a set temperature, and then reversing the coils to give the cord the necessary | *Coil cords are formed by spirally wrapping cable around a metal mandrel, heating to a set temperature, and then reversing the coils to give the cord the necessary retractile memory. | ||
於 2016年9月1日 (四) 13:14 的修訂
Coiled Code Test
- 600mm -> 3000m
- 量拉力
- 7 Days
- 量測放鬆後的長度
- 1000mm -> 5000m
- 量拉力
- 7 Days
- 量測放鬆後的長度
卷線動態拉伸試驗
- 先測出螺旋線之自重長(L1),以每分鐘30次之頻率,將螺旋部份伸長至原長度的3倍後再復原為一次,連績試驗至10,000次,再測其自重長(L2),其變化率不得大於20%,同時不得有繼續,半斷線。自重長變化率=(L2-L1)/L*100%,TSK的測試數據為15%
卷線的靜態拉伸試驗
- 將卷長長度L1拉伸到3倍,置放72小時候,將卷線長度恢復到原來位置L2,量測其變化率不得大於20%,TSK的測試數據為18%左右。
卷線英文說明
- Coil cords are formed by spirally wrapping cable around a metal mandrel, heating to a set temperature, and then reversing the coils to give the cord the necessary retractile memory.