「Capacitance and Relative test」:修訂間差異

出自TSK WIKI
跳至導覽 跳至搜尋
Root​(留言 | 貢獻)
Tpl​(留言 | 貢獻)
 
(未顯示同一使用者於中間所作的 1 次修訂)
第1行: 第1行:
==75℃ Capacitance and Relative test of THHW==
*UL 2556 6.5 Capacitance and relative permittivity
*The relative permittivity (dielectric constant) of the insulation shall be determined after 1 d by means of the following formula:
<php>
εr=41390/L*C*log(D/d)
where
sample:4.6m
immersed in water:3.05m
εr = relative permittivity
L = length of specimen immersed in water, m
C = capacitance in microfarads of the immersed 3050 mm (120 in) portion of the specimen (F;remark μF)
D = measured diameter over the insulation, mm (in)
d = measured diameter under the insulation, mm (in)
form:2015/12/16 UL 2556 Revised
</php>
==75℃ Capacitance and Relative test of THHW==
==75℃ Capacitance and Relative test of THHW==
*UL 2556 6.5 Capacitance and relative permittivity
*UL 2556 6.5 Capacitance and relative permittivity

於 2016年12月22日 (四) 11:34 的最新修訂

75℃ Capacitance and Relative test of THHW

  • UL 2556 6.5 Capacitance and relative permittivity
  • The relative permittivity (dielectric constant) of the insulation shall be determined after 1 d by means of the following formula:

<php> εr=41390/L*C*log(D/d) where sample:4.6m immersed in water:3.05m

εr = relative permittivity L = length of specimen immersed in water, m C = capacitance in microfarads of the immersed 3050 mm (120 in) portion of the specimen (F;remark μF) D = measured diameter over the insulation, mm (in) d = measured diameter under the insulation, mm (in) form:2015/12/16 UL 2556 Revised </php>

75℃ Capacitance and Relative test of THHW

  • UL 2556 6.5 Capacitance and relative permittivity
  • The relative permittivity (dielectric constant) of the insulation shall be determined after 1 d by means of the following formula:

<php> εr=13,600*C*log(D/d) where sample 4.6m εr = relative permittivity C = capacitance in microfarads of the immersed 4.6m portion of the specimen(F;remark μF) D = measured diameter over the insulation, mil d = measured diameter under the insulation, mil form:2013/11/12 mail </php>

  • 24hr <10%;24-336hr<10%;168-336hr <5%
  • 90℃ Capacitance and Relative test of THW-2
  • 75℃ Capacitance and Relative test of THHW
  • 30℃ Capacitance and Relative test of MTW

Apparatus

  • The apparatus shall consist of the following:
    • a capacitance bridge capable of operating at a sinusoidal or nearly sinusoidal voltage at a frequency of 1000 Hz at 10 V or less, or 60 Hz at 3.15 kV/ mm (80 V/mil) of insulation thickness;
    • a water tank capable of maintaining the water at the required temperature; and
    • a temperature-measuring device with an accuracy of ±1°C.