「Robot-TOP電線研發規劃」:修訂間差異
跳至導覽
跳至搜尋
| (未顯示由 2 位使用者於中間所作的 38 次修訂) | |||
| 第1行: | 第1行: | ||
== | ==體積抵抗率(單位:ohm m)== | ||
*HY8238 | *DU POND | ||
*HY6356:8.0E+11 | **HY8238:1.0E+13 | ||
*HY5556:4.0E+11 | **HY6356:8.0E+11 | ||
*IHV-9851N:1.0E+11 | **HY5556:4.0E+11 | ||
*IHV-9874N:1.0E+11 | **DU PONT查詢網址:https://dupont.materialdatacenter.com | ||
*DSM | |||
**EM740:1.0E+13 | |||
*理研 | |||
**IHV-9851N:1.0E+11 | |||
**IHV-9874N:1.0E+11 | |||
*絕緣抵抗率轉換體積抵抗率公式: | |||
**[http://192.168.1.100:81/D%3A/RD/%E5%90%84%E7%A8%AE%E5%8F%83%E8%80%83%E8%B3%87%E6%96%99/%E5%AE%89%E8%A6%8F%E6%A2%9D%E6%96%87/JIS%E9%9B%BB%E7%B7%9A%E8%A6%8F%E6%A0%BC/PVC%20Compnd673/JIS6723_10.png JIS K 6723 Page.10] | |||
**R:\品保\光輝體積扺抗試驗記錄.123 | |||
==HYTREL認證== | ==HYTREL認證== | ||
| 第18行: | 第29行: | ||
**Style [http://data.ul.com/link/stylepage.aspx?style=10912 10912] 105℃ 600V 8mil(0.203mm),未來通用於600V及300V | **Style [http://data.ul.com/link/stylepage.aspx?style=10912 10912] 105℃ 600V 8mil(0.203mm),未來通用於600V及300V | ||
**Style [http://data.ul.com/link/stylepage.aspx?style=10140 10140] 80℃ 30V 2mil(0.051mm),未來使用於30V,如捲線厚度0.15t | **Style [http://data.ul.com/link/stylepage.aspx?style=10140 10140] 80℃ 30V 2mil(0.051mm),未來使用於30V,如捲線厚度0.15t | ||
*因耐燃原因改修改認證計劃 | |||
** 11097 | |||
** 11098 | |||
** 10666 | |||
==認證前自我測試== | |||
** 11097 HYTREL 6356 0.085t 0.98φ | |||
** 11098 HYTREL 6356 0.17t 1.15φ | |||
** 10666 HYTREL 6356 0.25t 1.3φ | |||
** 20160818押出紫色樣品 | |||
==尼龍絕緣被覆NYLON== | ==尼龍絕緣被覆NYLON== | ||
| 第23行: | 第43行: | ||
*[http://www.ube-ind.co.jp/japanese/products/chemical/chemical_02.htm 宇部尼龍] | *[http://www.ube-ind.co.jp/japanese/products/chemical/chemical_02.htm 宇部尼龍] | ||
** TSS-023N 系列使用宇部的PA6 1013B | ** TSS-023N 系列使用宇部的PA6 1013B | ||
== | ==相關的TPES,TPE 單芯線== | ||
{|class="wikitable" | {|class="wikitable" | ||
|style | |style | ||
| 第44行: | 第64行: | ||
|None | |None | ||
| | | | ||
|---- | |||
|<span style="color:red">10140</span> | |||
|TPES | |||
|2 | |||
|42 AWG | |||
|n/a | |||
|80 | |||
|30ac | |||
|None | |||
| | |||
|---- | |||
|<span style="color:green">11097</span> | |||
|TPE | |||
|3 | |||
|44 AWG | |||
|10 AWG | |||
|105 | |||
|30ac | |||
|None | |||
| | |||
|---- | |||
|<span style="color:green">11098</span> | |||
|TPE | |||
|6 | |||
|44 AWG | |||
|10 AWG | |||
|105 | |||
|300ac | |||
|None | |||
| | |||
|---- | |||
|<span style="color:blue">10282</span> | |||
|TPES | |||
|5 | |||
|42 AWG | |||
|n/a | |||
|90 | |||
|90ac | |||
|None | |||
|IGUS | |||
|---- | |---- | ||
|10263 | |10263 | ||
| 第145行: | 第205行: | ||
| | | | ||
|---- | |---- | ||
|10912 | |<span style="color:red">10912</span> | ||
|TPES | |TPES | ||
|8 | |8 | ||
| 第154行: | 第214行: | ||
|Horizontal | |Horizontal | ||
| | | | ||
|---- | |||
|<span style="color:green">10666</span> | |||
|TPE | |||
|9 | |||
|30 AWG | |||
|6 AWG | |||
|105 | |||
|600ac | |||
|None | |||
|日合 | |||
|---- | |---- | ||
|11104 | |11104 | ||
| 第191行: | 第261行: | ||
**[http://data.ul.com/link/stylepage.aspx?style=10911 10911] | **[http://data.ul.com/link/stylepage.aspx?style=10911 10911] | ||
**[http://data.ul.com/link/stylepage.aspx?style=10912 10912] | **[http://data.ul.com/link/stylepage.aspx?style=10912 10912] | ||
==阻燃替代方案== | |||
*原欲申請TPES | |||
**10140 | |||
**10912 | |||
*改申請TPE(限定使用在cable內;非單心線販售) | |||
** 11097 | |||
** 11098 | |||
** 10666 | |||
* TPE UL 1581 Table 50.223,50.224 | |||
** TPE designates an extensible compound whose characteristic constituent is a themoplastic elastomer. | |||
** Unaged: 200% 5.52MPa | |||
** Aged: 75% 75% | |||
* TPES UL 1581 Table 50.226 | |||
**TPES designates a compounded thermoplastic material whose characteristic constituent is a polyester such as PBT or PET, their individual copolymers, blends of any of these. | |||
** Unaged: 100% 10.3MPa | |||
** Aged: 65% 75% | |||
==單芯線測試項目== | |||
Basic tests: | |||
*Physical Properties Unaged and Air Oven Aged, Section 14. | |||
*Conductor Corrosion Test, Section 18 | |||
*Deformation Test (Thermoplastics and Class XL Only), Section 19. | |||
*Flexibility Test, Section. 21. | |||
*Heat Shock Test (Thermoplastic Materials Only), Section 22. | |||
*Cold Bend Test, Section 23. | |||
*Durability of Ink-Print Test, Section 27 | |||
*Crush Resistance Test, Section 28. | |||
*Dielectric Test, Method I, Section 29. | |||
*Dielectric Test, Method II, Section 30. | |||
*Dielectric Test, Method III, Section 31. | |||
*Horizontal Flame Test for Internal Wiring, Section 40. | |||
*<span style="color:red">送樣注意事項</span> | |||
**送測樣品之絕緣押出前必須先行乾燥 | |||
==20160719== | ==20160719== | ||
| 第246行: | 第349行: | ||
**電纜一般是否都用套管式作業(tubing),厚度最厚能到多少(TSK tubing+Vacuum)? | **電纜一般是否都用套管式作業(tubing),厚度最厚能到多少(TSK tubing+Vacuum)? | ||
***tubing 2-3mm ok | ***tubing 2-3mm ok | ||
==其他供應商== | |||
*[http://www.polyrocks.com/zrdx/resuxingwuluzuranTPE.html 聚石化學] | |||
*[http://www.tblend.com/cn/T-blend/index3.aspx 台橡] | |||
==測試設備== | |||
*SKT購買廠商 | |||
**[http://www.thtechnic.com 拓博試驗機] | |||
於 2019年1月25日 (五) 16:50 的最新修訂
體積抵抗率(單位:ohm m)
- DU POND
- HY8238:1.0E+13
- HY6356:8.0E+11
- HY5556:4.0E+11
- DU PONT查詢網址:https://dupont.materialdatacenter.com
- DSM
- EM740:1.0E+13
- 理研
- IHV-9851N:1.0E+11
- IHV-9874N:1.0E+11
- 絕緣抵抗率轉換體積抵抗率公式:
- JIS K 6723 Page.10
- R:\品保\光輝體積扺抗試驗記錄.123
HYTREL認證
- Hytrel® DuPont
- 承茂專員:吳文傑(Jack Wu) jack.wu@chinmou.com.tw
- Thermoplastic elastomer
- TPES (UL style no Material)
- TPC-ET(歐規)
- Style no. 10912 (Northwire used)
- 認證規劃:
- 因耐燃原因改修改認證計劃
- 11097
- 11098
- 10666
認證前自我測試
- 11097 HYTREL 6356 0.085t 0.98φ
- 11098 HYTREL 6356 0.17t 1.15φ
- 10666 HYTREL 6356 0.25t 1.3φ
- 20160818押出紫色樣品
尼龍絕緣被覆NYLON
相關的TPES,TPE 單芯線
| style | Insulation | it_min | cond_min | cond_max | temp | volts | Flame | remark |
| 10042 | TPES | 8 | 32 AWG | 2 AWG | 80 | 300ac | None | |
| 10140 | TPES | 2 | 42 AWG | n/a | 80 | 30ac | None | |
| 11097 | TPE | 3 | 44 AWG | 10 AWG | 105 | 30ac | None | |
| 11098 | TPE | 6 | 44 AWG | 10 AWG | 105 | 300ac | None | |
| 10282 | TPES | 5 | 42 AWG | n/a | 90 | 90ac | None | IGUS |
| 10263 | TPES | 12 | 32 AWG | 4/0 AWG | 80 | 600, 1000ac | None | |
| 10264 | TPES | 16 | 32 AWG | 4/0 AWG | 80 | 1000ac | None | |
| 10390 | TPES | 10 | 36 AWG | 4/0 AWG | 80 | 600ac | None | |
| 10903 | TPES | 8 | 44 AWG | 6 AWG | 60 | 300ac | Horizontal | |
| 10904 | TPES | 8 | 44 AWG | 6 AWG | 60 | 600ac | Horizontal | |
| 10907 | TPES | 8 | 44 AWG | 6 AWG | 80 | 300ac | Horizontal | |
| 10908 | TPES | 8 | 44 AWG | 6 AWG | 80 | 600ac | Horizontal | |
| 10909 | TPES | 8 | 44 AWG | 6 AWG | 105 | 30ac | Horizontal | |
| 10910 | TPES | 8 | 44 AWG | 6 AWG | 105 | 150ac | Horizontal | |
| 10911 | TPES | 8 | 44 AWG | 6 AWG | 105 | 300ac | Horizontal | |
| 10912 | TPES | 8 | 44 AWG | 6 AWG | 105 | 600ac | Horizontal | |
| 10666 | TPE | 9 | 30 AWG | 6 AWG | 105 | 600ac | None | 日合 |
| 11104 | TPES | 8 | 44 AWG | 6 AWG | 105 | 600ac | Horizontal | |
| 11105 | TPES | 8 | 44 AWG | 6 AWG | 105 | 300ac | Horizontal | |
| 11169 | TPES | 30 | 50 AWG | 10 AWG | 125 | 600ac | None |
阻燃替代方案
- 原欲申請TPES
- 10140
- 10912
- 改申請TPE(限定使用在cable內;非單心線販售)
- 11097
- 11098
- 10666
- TPE UL 1581 Table 50.223,50.224
- TPE designates an extensible compound whose characteristic constituent is a themoplastic elastomer.
- Unaged: 200% 5.52MPa
- Aged: 75% 75%
- TPES UL 1581 Table 50.226
- TPES designates a compounded thermoplastic material whose characteristic constituent is a polyester such as PBT or PET, their individual copolymers, blends of any of these.
- Unaged: 100% 10.3MPa
- Aged: 65% 75%
單芯線測試項目
Basic tests:
- Physical Properties Unaged and Air Oven Aged, Section 14.
- Conductor Corrosion Test, Section 18
- Deformation Test (Thermoplastics and Class XL Only), Section 19.
- Flexibility Test, Section. 21.
- Heat Shock Test (Thermoplastic Materials Only), Section 22.
- Cold Bend Test, Section 23.
- Durability of Ink-Print Test, Section 27
- Crush Resistance Test, Section 28.
- Dielectric Test, Method I, Section 29.
- Dielectric Test, Method II, Section 30.
- Dielectric Test, Method III, Section 31.
- Horizontal Flame Test for Internal Wiring, Section 40.
- 送樣注意事項
- 送測樣品之絕緣押出前必須先行乾燥
20160719
- 試作7/0.20TA(導体OD約0.6)
- 添加比例6356:52FR:色母=10:1:0.4
- 乾燥110℃x4小時以上
- 水平燃燒試驗:https://youtu.be/_J5qD_PreOs
- 試樣1(黑):
- 厚度0.15
- 表面粗糙(魚鱗狀),伸長率OK
- 耐燃Fail(超過10cm)
- 試樣2(白):
- 厚度0.15
- 表面粗糙(魚鱗狀),伸長率OK
- 耐燃Fail(超過10cm)
- 試樣3(白)
- 厚度0.3
- 表面OK,伸長率OK
- 耐燃Fail(超過10cm,且13秒時滴落引燃棉花)
- 試樣1(黑):
20160713含水率
- 52FR 製程要求含水率(Processing moisture content≦0.08%)
- 6356 SPC: Water Absorption(Immersion 24hr) 0.3%,(Processing moisture content≦0.1%)
- 實測 110℃X4hr
- 52FR 去除含水率 0.23%
- 6356 去除含水率 0.26%
2016/05/27試作
- 改以6356+ FR試作
- 10:1:0.4
- 添加色母表面粗糙,沒有伸長率
- 不添加色母表面略改善,伸長率仍不佳。
2016/05/18承茂供料52FR 3kg
- 以 STYLE 10912及10140進行試作設計
- 10912 1/0.81AC 0.22t 1.25ψ
- 10140 1/0.81AC 0.15t 1.1ψ
- 採用Hytrel 5556:52FR 10:1
2016/05/12承茂提問
- 尼龍部份:
- PA6 與PA66差異?
- 差異不大,杜邦主要生產PA66。
- 押出級及射出級除流動性差異外?還有哪些?目前TSK使用的是射出級的。
- 射出級分子量較小,所以流動性比較好,押出級有再脫水增加黏著性,剛性的部份差不多。
- 目前遇到的問題是SR-PVC(0.15t/0.9d)+Nylon(0.1t/1.1d),在彎折時會尼龍會剝離,在識別印時時,壓力也會造成尼龍剝離。
- 會再提供PA66的品號及價格。
- PA6 與PA66差異?
- Hytrel:
- 目前是否有用於絕緣的牌號阻燃效果比較好,最小厚度要求多少
- 5556HR,UL 有來文,有通過10912,杜邦會再提供該文件。因添加熱穩定劑,本色偏黃。
- 計劃申請UL AWM STYLE 10912(Horizontal flame)
- 添加阻燃劑的效果如何(52FR V-2?)?
- 會提供52FR 3Kg,提供試料,若還有試樣要求,可提供50KG FREE SAMPLE
(Hytrel Design Guide.pdf)
- 電纜一般是否都用套管式作業(tubing),厚度最厚能到多少(TSK tubing+Vacuum)?
- tubing 2-3mm ok
- 目前是否有用於絕緣的牌號阻燃效果比較好,最小厚度要求多少
其他供應商
測試設備
- SKT購買廠商