「通信特性」:修訂間差異
跳至導覽
跳至搜尋
| (未顯示由 2 位使用者於中間所作的 16 次修訂) | |||
| 第1行: | 第1行: | ||
== USB 3.0 Cable Length== | |||
11.4.7<BR> | |||
Wire Gauge Table<BR> | |||
Table 11-3 is a table of VBUS/Gnd wire gauges showing the relationship between gauge and | |||
maximum length in order to achieve the previously cited voltage drop values. The user should note | |||
that these lengths are the maximum length possible to meet the voltage drop budget, thus gauges | |||
smaller and lengths greater than the table values will fail to deliver the expected voltage value.<BR> | |||
<BR> | |||
Table 11-3. VBUS/Gnd Wire Gauge vs. Maximum Length | |||
{|class="wikitable" | |||
|American Stranded Wire Gauge<BR>(AWG) on VBUS/Gnd | |||
|Ohms Per 100 Meters<BR>(Maximum) | |||
|Maximum Cable Length<BR>(Meters) | |||
|---- | |||
|28 | |||
|23.20 | |||
|0.8 | |||
|---- | |||
|26 | |||
|14.60 | |||
|1.3 | |||
|---- | |||
|24 | |||
|9.09 | |||
|2.0 | |||
|---- | |||
|22 | |||
|5.74 | |||
|3.0 | |||
|---- | |||
|20 | |||
|3.58 | |||
|5.3 | |||
|} | |||
==USB 3.0 Cable Flexing (EIA 364-41, Condition I)== | |||
No physical damage or discontinuity over 1 ms during flexing shall occur to the cable assembly with Dimension X = 3.7 times the cable diameter and 100 cycles in each of two planes. | |||
== USB 2.0 == | |||
{|class="wikitable" | |||
|colspan=4| Characterisitics | |||
|- | |||
|Voltage Rating | |||
|30 | |||
| | |||
|V | |||
|- | |||
|rowspan=5| Conductor Resistance | |||
|28AWG | |||
|0.232 | |||
|Ω/m | |||
|- | |||
|26AWG | |||
|0.145 | |||
|Ω/m | |||
|- | |||
|24AWG | |||
|0.0909 | |||
|Ω/m | |||
|- | |||
|22AWG | |||
|0.057 | |||
|Ω/m | |||
|- | |||
|20AWG | |||
|0.035 | |||
|Ω/m | |||
|- | |||
|Unbalance Resistance | |||
|≦ 5% | |||
| | |||
| | |||
|- | |||
|Impedance | |||
|90 | |||
|±15% | |||
|Ω | |||
|- | |||
|rowspan=13| Attenuation | |||
|0.06MHz | |||
|0.08 | |||
|dB/cable | |||
|- | |||
|0.26MHz | |||
|0.11 | |||
|dB/cable | |||
|- | |||
|0.51MHz | |||
|0.13 | |||
|dB/cable | |||
|- | |||
|0.77MHz | |||
|0.15 | |||
|dB/cable | |||
|- | |||
|1MHz | |||
|0.2 | |||
|dB/cable | |||
|- | |||
|4MHz | |||
|0.39 | |||
|dB/cable | |||
|- | |||
|8MHz | |||
|0.57 | |||
|dB/cable | |||
|- | |||
|12MHz | |||
|0.67 | |||
|dB/cable | |||
|- | |||
|24MHz | |||
|0.95 | |||
|dB/cable | |||
|- | |||
|48MHz | |||
|1.35 | |||
|dB/cable | |||
|- | |||
|96MHz | |||
|1.9 | |||
|dB/cable | |||
|- | |||
|200MHz | |||
|3.2 | |||
|dB/cable | |||
|- | |||
|400MHz | |||
|5.8 | |||
|dB/cable | |||
|- | |||
|Propagation Delay | |||
|1-400MHz | |||
|26 | |||
|ns | |||
|- | |||
|Delay Skew | |||
|100 | |||
| | |||
|ps/cable | |||
|- | |||
|} | |||
== Cat 5e UTP == | == Cat 5e UTP == | ||
| 第7行: | 第148行: | ||
|Unit | |Unit | ||
|---- | |---- | ||
|Characteristic impedance | |Characteristic impedance @ 100 MHz | ||
|100 | |100 | ||
|± 15 | |± 15 | ||
|Ω | |Ω | ||
|---- | |---- | ||
|Nominal | |Nominal characteristic impedance @ 100 MHz | ||
|100 | |100 | ||
|± 5 | |± 5 | ||
| 第32行: | 第173行: | ||
|ns/m | |ns/m | ||
|---- | |---- | ||
|Delay skew | |Delay skew < 100 MHz | ||
| | |< 0.20 | ||
| | | | ||
|ns/m | |ns/m | ||
|---- | |---- | ||
|Capacitance | |Capacitance at 800 Hz | ||
|52 | |52 | ||
| | | | ||
| 第47行: | 第188行: | ||
|nH/m | |nH/m | ||
|---- | |---- | ||
|Corner frequency | |Corner frequency | ||
|≤57 | |≤57 | ||
| | | | ||
| 第241行: | 第382行: | ||
|dB | |dB | ||
|- | |- | ||
|Propagation Delay | |rowspan=3| Propagation Delay | ||
|1MHz | |1MHz | ||
|MAX | |MAX | ||
|570 | |570 | ||
|ns/100m | |ns/100m | ||
|- | |- | ||
|10MHz | |10MHz | ||
|MAX | |MAX | ||
|545 | |545 | ||
|ns/100m | |ns/100m | ||
|- | |- | ||
|100MHz | |100MHz | ||
|MAX | |MAX | ||
|538 | |538 | ||
|ns/100m | |ns/100m | ||
| | |- | ||
|Delay Skew | |Delay Skew | ||
|1~100MHz | |1~100MHz | ||
| 第264行: | 第403行: | ||
|45 | |45 | ||
|ns/100m | |ns/100m | ||
| | |- | ||
|} | |} | ||
==參考資料== | |||
*[http://wordpress.morezman.com/?p=266 銅纜測試項目–衰減 Insertion Loss (Attenuation)] | |||
於 2018年8月14日 (二) 10:10 的最新修訂
USB 3.0 Cable Length
11.4.7
Wire Gauge Table
Table 11-3 is a table of VBUS/Gnd wire gauges showing the relationship between gauge and
maximum length in order to achieve the previously cited voltage drop values. The user should note
that these lengths are the maximum length possible to meet the voltage drop budget, thus gauges
smaller and lengths greater than the table values will fail to deliver the expected voltage value.
Table 11-3. VBUS/Gnd Wire Gauge vs. Maximum Length
| American Stranded Wire Gauge (AWG) on VBUS/Gnd |
Ohms Per 100 Meters (Maximum) |
Maximum Cable Length (Meters) |
| 28 | 23.20 | 0.8 |
| 26 | 14.60 | 1.3 |
| 24 | 9.09 | 2.0 |
| 22 | 5.74 | 3.0 |
| 20 | 3.58 | 5.3 |
USB 3.0 Cable Flexing (EIA 364-41, Condition I)
No physical damage or discontinuity over 1 ms during flexing shall occur to the cable assembly with Dimension X = 3.7 times the cable diameter and 100 cycles in each of two planes.
USB 2.0
| Characterisitics | |||
| Voltage Rating | 30 | V | |
| Conductor Resistance | 28AWG | 0.232 | Ω/m |
| 26AWG | 0.145 | Ω/m | |
| 24AWG | 0.0909 | Ω/m | |
| 22AWG | 0.057 | Ω/m | |
| 20AWG | 0.035 | Ω/m | |
| Unbalance Resistance | ≦ 5% | ||
| Impedance | 90 | ±15% | Ω |
| Attenuation | 0.06MHz | 0.08 | dB/cable |
| 0.26MHz | 0.11 | dB/cable | |
| 0.51MHz | 0.13 | dB/cable | |
| 0.77MHz | 0.15 | dB/cable | |
| 1MHz | 0.2 | dB/cable | |
| 4MHz | 0.39 | dB/cable | |
| 8MHz | 0.57 | dB/cable | |
| 12MHz | 0.67 | dB/cable | |
| 24MHz | 0.95 | dB/cable | |
| 48MHz | 1.35 | dB/cable | |
| 96MHz | 1.9 | dB/cable | |
| 200MHz | 3.2 | dB/cable | |
| 400MHz | 5.8 | dB/cable | |
| Propagation Delay | 1-400MHz | 26 | ns |
| Delay Skew | 100 | ps/cable | |
Cat 5e UTP
| Property | Nominal Value | Tolerance | Unit |
| Characteristic impedance @ 100 MHz | 100 | ± 15 | Ω |
| Nominal characteristic impedance @ 100 MHz | 100 | ± 5 | Ω |
| DC-Loop resistance | ≤0.188 | Ω/m | |
| Propagation speed | 0.64 | c | |
| Propagation delay | 4.80-5.30 | ns/m | |
| Delay skew < 100 MHz | < 0.20 | ns/m | |
| Capacitance at 800 Hz | 52 | pF/m | |
| Inductance | 525 | nH/m | |
| Corner frequency | ≤57 | kHz | |
| Max tensile load, during installation | 100 | N | |
| Wire diameter | AWG 24 | ||
| Insulation thickness | 0.245 | mm | |
| Maximum current per conductor | 0.577 | A | |
| Maximum operating voltage | 125 | V DC |
TSS-805-06
| ITEM | CHARACTERISTIC | |||
| Conductor Resistance | 20℃ | MAX | 93.8 | Ω/Km |
| Dielectric Strength | AIR | AC | 350 | V/min |
| Insulated Resistance | 20℃ | MIN | 5000 | MΩ-Km |
| Conductor Resistance Unbalance | MAX | 5 | % | |
| Static Capacity | 1kHz | MAX | 5.9 | nF/100m |
| Capacitance Unbalance | 1kHz | MAX | 330 | pF/100m |
| Attenuation | 0.772MHz | MAX | 2.4 | dB/100m |
| 1MHz | MAX | 2.8 | dB/100m | |
| 4MHz | MAX | 5.4 | dB/100m | |
| 8MHz | MAX | 7.5 | dB/100m | |
| 10MHz | MAX | 8.3 | dB/100m | |
| 16MHz | MAX | 10.4 | dB/100m | |
| 20MHz | MAX | 11.6 | dB/100m | |
| 25MHz | MAX | 13 | dB/100m | |
| 31.25MHz | MAX | 14.6 | dB/100m | |
| 62.5MHz | MAX | 21 | dB/100m | |
| 100MHz | MAX | 26.9 | dB/100m | |
| Impedance | 1~100MHz | 80~110 | Ω | |
| Near-End Crosstalk | 0.772MHz | MIN | 64 | dB |
| 1MHz | MIN | 62.3 | dB | |
| 4MHz | MIN | 53.3 | dB | |
| 8MHz | MIN | 48.8 | dB | |
| 10MHz | MIN | 47.3 | dB | |
| 16MHz | MIN | 44.2 | dB | |
| 20MHz | MIN | 42.8 | dB | |
| 25MHz | MIN | 41.3 | dB | |
| 31.25MHz | MIN | 39.9 | dB | |
| 62.5MHz | MIN | 35.4 | dB | |
| 100MHz | MIN | 32.3 | dB | |
| Propagation Delay | 1MHz | MAX | 570 | ns/100m |
| 10MHz | MAX | 545 | ns/100m | |
| 100MHz | MAX | 538 | ns/100m | |
| Delay Skew | 1~100MHz | MAX | 45 | ns/100m |